Eiki LC-SD10 Sound Adjustment, No Show Function, Timer Function, Direct Operation, Menu Operation

Basic Operation

No Show Function

Press NO SHOW button on the remote control to black out the image. To restore to normal, press the NO SHOW button again or press any other button. When a projected image is captured and set as “User” in the Logo item in the Setting menu ( ☞ P36 ), the screen changes each time you press the NO SHOW button as follows :

black out ➜ the captured image ➜ normal ➜......

P-Timer Function

Press P-Timer button on the remote control. The timer display “00 : 00” appears on the screen and the timer starts to count time (00 : 00 ~ 59 : 59).

To stop P-Timer display, press the P-TIMER button. And then, press P-TIMER button again to cancel P-Timer function.

Message disappears after 4 seconds.

Sound Adjustment

Direct Operation

Volume

Press VOLUME (+/–) button on the remote control or on the top control to adjust volume. The volume dialog box appears on the screen for a few seconds.

VOLUME (+) button to increase volume, and VOLUME (–) button for decreasing.

Mute

Press MUTE button on the remote control to cut off sound. To restore sound to its previous level, press MUTE button again or press Volume (+/–).

Menu Operation

1	Press MENU button to display the On-Screen Menu. Press Point
	7 8 buttons to move the red frame pointer to SOUND Menu
	icon.
2	Press Point d button to move the red frame pointer to the item
	that you want to select, and then press SELECT button.

Volume

To increase volume, press Point 8 button, and press Point 7button to decrease volume.

Mute

Press Point 7 8 buttons to mute sound. Dialog box display is changed to “On” and sound is muted. To restore sound to its previous level, press Point7 8 buttons again.

Indicates approximate level of volume.

Press MUTE button to set Mute function On or Off.

The display disappears after 4 seconds.

Sound Menu icon

SOUND MENU

Indicates approximate level of volume.

Close Sound Menu.

21