Eiki LC-SD10 owner manual Manual PC Adjustment

Computer Input

Manual PC Adjustment

Some computers employ special signal formats which may not be tuned by Multi-Scan system of this projector. In this case, the projector cannot reproduce a proper image and the image may be recognized as a flickering picture, a non- synchronized picture, a non-centered picture or a skewed picture.

The Manual PC Adjustment function allows you to precisely adjust several parameters to match those special signal formats. You can store those adjusted parameters in the 5 independent memory areas, enabling you to call up whenever you need.

1	Press MENU button to display the On-Screen Menu. Press Point
	7 8 buttons to move the red frame pointer to PC Adjust Menu
	icon.
2	Press Point d button to move the red frame pointer to the item
	that you want to adjust and then press SELECT button.

Adjustment dialog box will appear. Press Point 7 8 buttons to adjust value.

Fine sync

Adjusts an image as necessary to eliminate flicker from the display. Press Point 78 buttons to adjust value.(From 0 to 31.)

Total dots

Adjusts the number of total dots in one horizontal period. Press Point 78 buttons and adjust number to match your PC image.

Horizontal

Adjusts horizontal picture position. Press Point 7 8 buttons to adjust the position.

Vertical

Adjusts vertical picture position. Press Point 7 8 buttons to adjust the position.

Current mode

Press SELECT button to show the information of computer selected.

Clamp

Adjusts clamp level. When the image has a dark bar(s), try this adjustment.

PC Adjust Menu icon

PC ADJUST MENU

Move the red frame pointer to the item and press SELECT button.

Shows status

(Stored / Free) of the

Selected Mode selected Mode.

Press Point 78 buttons to adjust the value.

Press SELECT button at this icon to adjust “Clamp,” “Display area (H/V)” or set “Full screen.”

Current mode

Press SELECT button at Current mode icon to show the information of computer connected.

25