Computer Input
Display area
Selects area displayed with this projector. Select the resolution at Display area dialog box.
Display area H
Adjustment of horizontal area displayed with this projector. Press Point 7 8 buttons to decrease/increase value to match the resolution of image. Then press the SELECT button.
Display area V
Adjustment of vertical area displayed with this projector. Press Point 7 8 buttons to decrease / increase value to match the resolution of image. Then press the SELECT button.
Full screen
Press Point 7 8 buttons to switch Full screen function to “On” or “Off.” Set “On” to resize the image with 4 x 3 aspect ratio to fit the screen.
Note :
Display area, Display area (H/V) and Full screen cannot be adjusted when “480p”, “575p”, “480i”, “575i”, “720i (HDTV)” , “1035i (HDTV)” or “1080i (HDTV)” is selected on PC SYSTEM Menu ( ☞ P23 ).
Press SELECT button at Display area icon to show the Display area dialog box.
Display area
Reset
Reset all adjust parameters on adjustment dialog box to previous figure.
Mode free
To clear adjustment parameters previously set, move the red frame pointer to Mode free icon and then SELECT button. Move the red arrow pointer to the Mode that you want to clear and then press SELECT button.
Store
To store adjustment parameters, move the red frame pointer to Store icon and then press SELECT button. Move the red arrow pointer to any of Mode 1 to 5 that you want to store to and then press SELECT button.
Quit
Closes PC Adjust Menu.
To clear adjustment data
Close this dialog box.
To store adjustment data
This Mode has parameters being stored.
Vacant Mode
Shows values of “Total dots,” “Horizontal,” “Vertical,” “Display area H,” and “Display area V.”
26