Eiki LC-SD10 Air Circulation, Installing the Projector in Proper Position, Moving the Projector

Page 4

Safety Instruction

Air Circulation

Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

Do not put any flammable objects near the vent.

Keep the exhaust vent at least 3’(1m) away from any objects.

Do not touch a peripheral part of the exhaust vent, espe- cially screws and metallic part. This area will become hot while the projector is being used.

Do not put anything on the cabinet. The materials put on the cabinet will not only get damaged but also cause fire hazard by heat.

Cooling fans are provided to cool down the projector. This projector monitors internal temperature and control the run- ning speed of the cooling fans.

Installing the Projector in Proper Position

Install the projector properly. Improper Installation may reduce

the lamp lifetime and cause a fire hazard.

20˚￿

Do not tilt the projector more than 20 degrees to either side.

20˚￿

Do not point the projector up to pro- ject an image.

NO UPWARD

Do not point the projector down to

project an image.

NO DOWNWARD

Do not put the projector on either

side to project an image.

NO SIDEWARD

Moving the Projector

When moving the projector, replace the Lens Cover and

Air Intake Ventretract Adjustable Feet to prevent damage to the lens and cabinet.

When the projector is not in use for an extended period, put it into the case (carrying bag) supplied with the projector.

Exhaust Vent (Hot air exhaust)

CAUTION

Carrying Bag (supplied) is intended for protection from dust and scratches on the surface of a cabinet, and it is not designed to protect an appliance from external forces. Do not transport a projector through a courier or transport services with this bag, otherwise the projector can be damaged. When handling a projector, do not drop, bump, subject it to strong forces or put other things on the cabinet.

CAUTION IN CARRYING OR TRANSPORTING

THE PROJECTOR

Do not drop or bump a projector, otherwise damages or malfunctions may result.

When carrying a projector, use a suitable carrying case.

Do not transport a projector by using a courier or transport service in an unsuitable transport case. This may cause damage to a projector. To transport a projector through a courier or transport service, consult your dealer for best way.

4

Image 4
Contents Model LC-SD10 To the Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandAir Circulation Installing the Projector in Proper PositionMoving the Projector Compliance Federal Communication Commission NoticeTable of Contents Features and Design Overview FrontBack BottomTop panel Terminals Remote Control Operating RangeConnecting the AC Power Cord PreparationProjector side AC Outlet side For the U.S.A. and Canada For Continental EuropeAdjustable Feet Positioning the ProjectorRemote Control Battery Installation Remove the batteryAttaching the Lens Cover Compartment lidInstallation Connecting to a ComputerTerminals of the Projector Cables used for connectionConnecting to Video Equipment Terminals of the Projector Cables used for connectionVideo Source example Component video output Video Cassette Recorder Video Disc PlayerHow to Operate the On-Screen Menu Respective adjustmentRemote Control Before OperationSetting Menu Input Menu PC Adjust Menu Image Adjust MenuAV System Menu Image Adjust Menu Menu BarTurning On the Projector Basic OperationTurning Off the Projector Adjusting the Screen Zoom AdjustmentFocus Adjustment Keystone AdjustmentSound Adjustment Timer FunctionNo Show Function Direct OperationInput Source Selection Computer InputRGB Auto Mode Computer System SelectionSelecting Computer System Manually SvgaPC Adjustment Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment Reset Mode freeDisplay area Display area HDirect Operation Image Level SelectionMenu Operation Image Level Adjustment Screen Size Adjustment Video Input Input Source Selection Video, S-VideoInput Menu VideoWhen the input source is coming from video Input Source Selection Component, RGB Scart 21-pinComponent Equipment connected to the ComputerVideo System Selection Video Jack or S-Video JackComputer in / Component in Jack Y, Pb/Cb, Pr/Cr AutoPicture level adjusted for the picture with fine tone User preset picture adjustment in Image Adjust Menu P34-35Cinema Image button Standard CinemaTint ColorSharpness Progressive Closes the Image MenuProvides image at a normal video aspect ratio of 4 Provides image at a wide screen ratio of 16Setting Setting MenuCeiling function Rear function Power management Lamp modeCeiling RearTo change the code of the remote control Remote ControlFactory default To change the code of the projectorUsing the Presentation Remote Control Presentation Remote ControlInstallation Compatible computersMaintenance Lamp ReplacementReplacement Lamp Type No Lamp ReplaceReset the lamp replace counter Lamp Replace CounterTop Control Projector is shut down and the Warning indicator lights redThen check the items below Cleaning the Projection Lens Follow these steps to clean the projection lensCloth. Avoid using an excessive amount of cleaner. Abrasive Air FilterProblem No power Image is out of focus TroubleshootingSome displays are not seen during the Operation Check the mouse setting on your computer ProblemNot work Indicators and Projector Condition Menu Tree Computer InputVideo Input Settings Main menuSound System Image SelectCompatible Computer Specifications FreqKHz 43.269Technical Specifications Configuration of Terminals Optional PartsCOMPONENT-VGA Cable Type No SCART-VGA Cable Type NoKey to better communications Canada