Eiki LC-X6, LC-SX6 owner manual Terminals, Input 2 terminals

Preparation

Terminals

w

q

r

	INPUT 1		ANALOG IN		ANALOG OUT	INPUT 3
AUDIO 1 DIGITAL (DVI-D)						R-AUDIO-L
						(MONO)
	INPUT 2					S-VIDEO
G	B	R	H/V	V	VIDEO/Y Cb/Pb	Cr/Pr
AUDIO 2
VIDEO/Y	Cb/Pb	Cr/Pr

e

q INPUT 1 terminals	e INPUT 3 terminals
AUDIO 1	AUDIO (R-L)
Connect the audio output from a computer or video	Connect the audio output from video equipment
equipment connected to DIGITAL (DVI-D) or ANALOG	connected to VIDEO/Y Cb/Pb Cr/Pr jacks or S-VIDEO
IN terminal to this jack. (p22, 24)	jack to these jacks. (When the audio output is
DIGITAL (DVI-D) (HDCP compatible)	monaural, connect it to L(MONO) jack. (p24, 25)
Connect digital output signal from a computer or	VIDEO/Y, Cb/Pb, and Cr/Pr
video equipment to this terminal with a DVI-D cable.	Connect video or component output (Y, Cb/Pb and
(p22, 24)	Cr/Pr) from video equipment to these jacks with a
ANALOG IN	video cable (RCA-type). (p24, 25)
Connect analog output signal from a computer or a	S-VIDEO
video equipment (Component or RGB Scart) to this	Connect S-Video output from video equipment to this
terminal with a VGA cable, a Scart-VGA or a	jack. (p24)
Component-VGA cable. (p22)
	r INPUT 2 terminals
w ANALOG OUT
This terminal can be used for analog signal output	AUDIO 2
incoming through the ANALOG IN terminal (INPUT 1).	Connect the audio output from video equipment
Connect this terminal to the other monitor with a VGA	connected to VIDEO/Y, Cb/Pb, and Cr/Pr jacks or G,
cable. (p22)	B, R, H/V, and V jacks to this jack. (p22, 25)
	VIDEO/Y, Cb/Pb, and Cr/Pr
	Connect video or component output (Y, Cb/Pb and
	Cr/Pr) from video equipment to these jacks with a
	video cable (BNC-type). (p25)
	G, B, R, H/V, and V
	Connect RGB output signal from a computer with a
	computer cable (5 BNC-type) to these jacks. (p22)

12