Eiki LC-X6, LC-SX6 owner manual Video or S-Video Signal Selection, Component Signal Selection

Page 40

System

Video or S-Video Signal Selection

Auto

The projector automatically detects incoming video system, and adjusts itself to optimize its performance.

When Video System is PAL-M or PAL-N, select system manually.

PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N

If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N.

✔Note:

When Auto is selected for the System menu, PAL-M and PAL-N cannot be selected.

Component Signal Selection

Auto

The projector automatically detects incoming video signal, and adjusts itself to optimize its performance.

COMPONENT VIDEO SIGNAL FORMAT

If the projector cannot reproduce proper video image, it is necessary to select a specific component video signal format among 480i, 575i, 480p, 575p, 720p, 1035i, 1080i/50 and 1080i/60.

AV System Menu (Video or S-Video)

Move the yellow frame pointer to a system and press the SELECT button to activate it.

AV System Menu (Component)

Move the pointer to a system and press the SELECT button to activate it.

40

Image 40

Contents LC-SX6 Features and Design Compatibility My LogoTable of Contents To The Owner Risk of Electric Shock Do not OpenSafety Instructions Voor de klanten in NederlandSetup In Proper Directions Positioning PrecautionsAir Circulation Bottom Front Downward Upward UsualMoving the Projector USE Caution in Carrying or Transporting the ProjectorCompliance Federal Communication Commission NoticePreparation Parts NameFront BackIndicators Top Control About Control PadTerminals Input 2 terminalsC Jack USBUSB Series B Serial Port OUTRemote Control Timer button 4REMOTE RESET/ON/ALL-OFF switchFreeze button VOL. buttonRemote Control Channel and ID Setup Remote Control TransmitterWired Remote Control Transmitter Remote Control Channel & Frequency Remote Control Battery InstallationRemote Control ID Installation InstallationLens Installation Positioning the ProjectorLens Shift Adjustment Level Adjustable FeetConnecting AC Power Cord For Continental EuropeFor the U.S.A. and Canada 200 240 V ACInterface Board Slots Connection TerminalsOption Control No Connecting to Computer Digital and Analog RGB Cables used for connectionConnecting to Digital PC/AV Equipment Warp & Blending Connecting to Video Equipment Digital and Video Connecting to Video Equipment Component and RGB Scart Wireless Remote Control Operation Basic OperationOperating the Projector Mouse Operation Projector Top Control OperationBasic Operation and Reference Buttons Top Control Remote ControlPad What is PIN code? Turning On the ProjectorEnter a PJ PIN code Selected Input and SourceTurning Off the Projector Zoom and Focus Adjustment Remote ControlShutter Function Top ControlInput Selection Auto PC AdjustmentInformation Keystone Adjustment Timer FunctionScreen Selection Picture Freeze FunctionVolume Control Zoom +/- FunctionTop Control/Remote Control Operation How to Operate the On-Screen MenuMouse Operation Menu icon Guide Control bar for Mouse OperationMouse cursor PointerMenu Icons and Their Features Menu icons What You Can Do with Each MenuInput InputRGB Scart Video Video Pb/Cb, Pr/CrVideo System SystemPC System Selection AutoVideo or S-Video Signal Selection Component Signal SelectionAV System Menu Video or S-Video AV System Menu ComponentComputer Adjustment PC AdjustmentAuto PC Adjust Auto PC adjManual PC Adjust Sync phase ResetPosition ModeImage Adjustment ImageFor PC Input For AV InputImage Adjust Auto picture control Color tempRed GreenGamma Noise reductionProgressive FilmScreen Setting Screen SettingScreen Zoom KeystoneCeiling RearSound SoundSound Menu TrebleSetting SettingLanguage MenuLogo Enter a Logo PIN codeBackground LampPower management Power managementDisplay Input searchLens memory Analog outShutter Shutter Management SecurityKey lock USB lockTo Change the PJ PIN Code setting To Change PJ PIN CodeFactory default Exits the Setting menuSpecial SpecialFan control FilterRS-232C Test patternUSB memory Exits Warning log menu InformationAll indicators except the Lamp indicator are blinking3 Maintenance and CleaningThen check the matters below Air Filter Replacement Maintenance & CleaningReset the Lamp time Lamp ReplacementLamp Lamp Handling Precautions Cleaning the Projector Cabinet Cleaning the Projection LensAttaching the Cord Cover Strap Indicators and Projector Condition Main IndicatorsAir filter is clogged with dust or has been used overtime Shutter IndicatorSlow Lamp Replace Indicators Troubleshooting AppendixWireless Remote Control Lens position moves when InputIs switched No soundCompatible Computer Specifications FreqVGA Technical Specifications Accessories Optional PartsScreen Setting Sound Menu TreeImage Image ADJ Special Lamp Dimensions Terminal Configurations USB Connector Series BPIN Code Lock No PIN Code Number MemoLogo PIN Code Lock No Index NumericsAppendix Key to better communications Canada