Eiki LC-SX6, LC-X6 owner manual Air Filter Replacement, Maintenance & Cleaning

Page 63

Maintenance and Cleaning

Air Filter Replacement

Air filters prevent dust from accumulating on the surface of the optical elements inside the projector. Should the air filters become clogged with dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat build up and adversely affect the life of the projector. Proper maintenance should be taken.

WARNING FILTER Indicator

This projector can monitor the filter condition. When the filter is clogged with dust and the performance is degraded, the WARNING FILTER indicator lights orange and let you know the filter replacement is required.

If the indicator is lighting orange, turn off the projector and replace the air filter immediately.

Using the projector with the WARNING FILTER indicator lighting may result in internal heat build up and cause damage to the optical elements inside the projector. The projector will shutdown automatically to protect itself when the projector's inside temperature is abnormally high.

1

Turn off the projector, and disconnect the AC power cord

 

from the AC outlet.

2

Pulling down the tabs on both sides top of the filter cover,

 

open the projector cover.

3

Pull out the air filter from the projector.

4

Replace the new air filter and the filter cover properly onto

 

the projector.

TOP CONTROL

WARNING FILTER lights orange

Filter cover

Maintenance & Cleaning

5

Reset the Filter time. See “Filter” in the Special menu on

 

p59.

CAUTION

Do not operate a projector with Air Filter removed. Dust may accumulate on LCD Panel and Mirror degrading picture quality.

Do not put small parts into Air Intake Vents. It may result in malfunction of a projector.

RECOMMENDATION

We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality.

When using under dusty or smoky conditions, dust may accumulate on liquid crystal panel, lens, or optical elements inside it. This condition may degrade quality of projected image.

When above symptoms are noticed, contact your authorized dealer or service station for proper cleaning.

Air filter

Note:

The projector cannot be operated with the air filter removed; it will shut down automatically if the air filter is removed while the projector is operating.

Used in a place where the air pressure is relatively low such as highlands, the WARNING FILTER indicator may light orange even the air filter is clean.

ORDER REPLACEMENT FILTER

When ordering the replacement air filter, give the following information to the dealer.

Model No. of your projector

:

LC-X6 /

LC-SX6

Replacement Filter Parts No.

:

610 315

1588

63

Image 63
Contents LC-SX6 Compatibility My Logo Features and DesignTable of Contents Risk of Electric Shock Do not Open To The OwnerVoor de klanten in Nederland Safety InstructionsBottom Front Downward Upward Usual Setup In Proper DirectionsPositioning Precautions Air CirculationUSE Caution in Carrying or Transporting the Projector Moving the ProjectorFederal Communication Commission Notice ComplianceBack PreparationParts Name FrontIndicators About Control Pad Top ControlInput 2 terminals TerminalsSerial Port OUT C JackUSB USB Series BRemote Control VOL. button Timer button4REMOTE RESET/ON/ALL-OFF switch Freeze buttonRemote Control Transmitter Remote Control Channel and ID SetupWired Remote Control Transmitter Remote Control Battery Installation Remote Control Channel & FrequencyRemote Control ID Positioning the Projector InstallationInstallation Lens InstallationLevel Adjustable Feet Lens Shift Adjustment200 240 V AC Connecting AC Power CordFor Continental Europe For the U.S.A. and CanadaConnection Terminals Interface Board SlotsOption Control No Cables used for connection Connecting to Computer Digital and Analog RGBConnecting to Digital PC/AV Equipment Warp & Blending Connecting to Video Equipment Digital and Video Connecting to Video Equipment Component and RGB Scart Mouse Operation Projector Top Control Operation Wireless Remote Control OperationBasic Operation Operating the ProjectorTop Control Remote Control Basic Operation and Reference ButtonsPad Selected Input and Source What is PIN code?Turning On the Projector Enter a PJ PIN codeTurning Off the Projector Top Control Zoom and Focus AdjustmentRemote Control Shutter FunctionAuto PC Adjustment Input SelectionInformation Picture Freeze Function Keystone AdjustmentTimer Function Screen SelectionZoom +/- Function Volume ControlHow to Operate the On-Screen Menu Top Control/Remote Control OperationMouse Operation Pointer Menu icon GuideControl bar for Mouse Operation Mouse cursorMenu icons What You Can Do with Each Menu Menu Icons and Their FeaturesInput InputRGB Scart Video Pb/Cb, Pr/Cr VideoVideo Auto SystemSystem PC System SelectionAV System Menu Component Video or S-Video Signal SelectionComponent Signal Selection AV System Menu Video or S-VideoAuto PC adj Computer AdjustmentPC Adjustment Auto PC AdjustManual PC Adjust Mode Sync phaseReset PositionFor AV Input Image AdjustmentImage For PC InputImage Adjust Green Auto picture controlColor temp RedFilm GammaNoise reduction ProgressiveScreen Setting Screen SettingScreen Rear ZoomKeystone CeilingTreble SoundSound Sound MenuMenu SettingSetting LanguageEnter a Logo PIN code LogoLamp BackgroundInput search Power managementPower management DisplayAnalog out Lens memoryShutter USB lock Shutter ManagementSecurity Key lockTo Change PJ PIN Code To Change the PJ PIN Code settingExits the Setting menu Factory defaultFilter SpecialSpecial Fan controlTest pattern RS-232CUSB memory Information Exits Warning log menuMaintenance and Cleaning All indicators except the Lamp indicator are blinking3Then check the matters below Maintenance & Cleaning Air Filter ReplacementLamp Replacement Reset the Lamp timeLamp Lamp Handling Precautions Cleaning the Projection Lens Cleaning the Projector CabinetAttaching the Cord Cover Strap Main Indicators Indicators and Projector ConditionShutter Indicator Air filter is clogged with dust or has been used overtimeSlow Lamp Replace Indicators Appendix TroubleshootingNo sound Wireless Remote ControlLens position moves when Input Is switchedFreq Compatible Computer SpecificationsVGA Technical Specifications Optional Parts AccessoriesMenu Tree Screen Setting SoundImage Image ADJ Special Lamp Dimensions USB Connector Series B Terminal ConfigurationsPIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No Numerics IndexAppendix Key to better communications Canada