Video Pb/Cb, Pr/Cr | Eiki LC-X6, LC-SX6 specs

Input

Input 2

Move a pointer to Input 2 and press the SELECT button.

Source Select Menu

RGB

Video

Y, Pb/Cb, Pr/Cr

When the input source is analog coming from a computer through the Input 2 (5 BNC-type: Red, Green, Blue, H. Sync. and V. Sync.) terminal, select RGB.

When video input signal is connected to the Input 2 (VIDEO) terminal , select Video.

When the input source is component coming from video equipment connected to the Input 2 (Y, Pb/Cb, Pr/Cr) terminal, select Y, Pb/Cb, Pr/Cr.

Move the pointer to RGB, Video or Y, Pb/Cb, Pr/Cr and press the SELECT button.

Input 3

Move a pointer to Input 3 and press the SELECT button.

Video	When video input signal is connected to the
	Input 3 (VIDEO) terminal, select Video.
	Input 3 (VIDEO) terminal, select Video.
	When the input source is component
Y, Pb/Cb, Pr/Cr	When the input source is component
	coming from video equipment connected
	coming from video equipment connected
	to the Input 3 (Y, Pb/Cb, Pr/Cr) terminal,
	select Y, Pb/Cb, Pr/Cr.
	When video input signal is connected to the
S-Video	When video input signal is connected to the
	Input 3 (S-VIDEO) terminal, select S-Video.
	Input 3 (S-VIDEO) terminal, select S-Video.

Source Select Menu

Move the pointer to Video, Y, Pb/Cb, Pr/Cr or S-Video and press the SELECT button.

Input 4

When digital PC/AV source is connected to the Warp & Blending board inserted into the Input 4 terminal, the following source menu will be displayed.

RGB (PC Digital)	When the input source is digital coming from a
	computer through the Input 4 (DVI) terminal,
	computer through the Input 4 (DVI) terminal,
	select RGB (PC Digital)
	When the input source compatible with HDCP
RGB (AV HDCP)	When the input source compatible with HDCP
	is coming from video equipment through the
	is coming from video equipment through the
	Input 4 (DVI) terminal, select RGB (AV HDCP).

✔Note:

Warp & Blending board is initially installed into the Input 4 terminal slot. For details on Warp & Blending feature, refer to the enclosed operation manual.

Input 5

A source menu appears corresponding to the board module inserted into the Input 5 terminal.

✔Note:

•Input 4 and Input 5 can not be selected when no interface board is inserted into the respective slots. (p21)

•Input 5 terminal can only accept digital signals.

•Adjusted values or selected settings in Input 4 and Input 5 return to factory default setting when the connected interface boards are removed from those terminal slots.