Image Adjustment
Move the pointer to one of the followings with the Control pad and press the SELECT button.
LIST ............displays Color Management List window to store
the adjustment data.
COLOR.M ..returns to the previous image with the Color management pointer.
MENU .........displays a confirmation dialog box. Select "Yes" to
return to the menu display.
Color management list
After selecting LIST on the Color selection window, Color Management List will appear. Move the pointer to one of the followings with the Control pad and press the SELECT button.
ALL DEL......deletes all the data on the list.
MENU .........displays a confirmation dialog box. Select "Yes" to
return to the menu display.
COLOR M...returns to the previous image with the Color management pointer.
Press the CANCEL button to exit the Color management mode.
Color management list
Clear the check mark with the SELECT button not to apply the adjusted color to the projected image.
Move the pointer to the selected color and press the SELECT button.
The confirmation dialog box appears.
Select [Yes] to return to the menu display.
Auto picture control
With this function enabled, the projected image will be easier to see by emphasizing black of the picture. Select one from the following settings:
Off ······disabled
L1 ······ emphasizes black of the picture.
L2 ·······emphasizes black of the picture greater than L1.
Color temp.
Select a level among XLow, Low, Mid and High with the Control pad and the SELECT button.
Red
Lighten or deepen red tone of the picture with the Control pad. (From 0 to 63.)
Green
Lighten or deepen green tone of the picture with the Control pad. (From 0 to 63.)
Blue
Lighten or deepen blue tone of the picture with the Control pad. (From 0 to 63.)
✔Note:
If either value of Red, Green, and Blue is adjusted, "Adj." will be selected in Color temp. automatically.
Sharpness
Soften or sharpen the image with the Control pad. (From 0 to 15.)
The setting selected.
The setting selected.
46