Intel MP2016, MP5000, MP3000 user manual Video, Display & Recording Rate, Product Camera Sets

Page 24

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

AutoScan:

This function allows you to view each camera image in numerical sequence under 1-Cam Display mode. Check AutoScan to enable this function and define the scan interval from 1 to 60 seconds (defaults 3 seconds). When in this function is enabled, you need to

return to the main menu and click to start the AutoScan

function. During AutoScan, you can click Focus Camera to jump to any camera. To stop the AutoScan

function, click again.

4.Video

For Video Standard, you need to choose from NTSC and PAL according to the system you are using.

5.Display & Recording Rate

With this button you can set display and recording rate by camera. You will see the following dialog box when you click this button. There are 5 levels of display and recording rate. Drag the bar to adjust the display/ recording rate for each camera.

In case All is checked, you will see that while you’re adjusting the rate for one camera, the rate of other cameras will be adjusted at the same time. Cameras that are adjusted together use the same video chip on the video capture card.

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

6.640 x 480 Resolution

The utility provides your particular demand on the better 640 x 480 resolution for the specific cameras. For EYES Pro/MP2016/ MP3000, you can check the cameras to perform the better resolution by clicking this button. Note that the cameras are arranged to be sets according to the same video chip on the video capture card. For MP5000, you can set all cameras randomly to perform 640 x 480 resolution. The arranged camera sets are listed as follows:

Product

 

 

Camera Sets

 

4 EYES Pro

1,2,3,4

 

 

 

 

 

8 EYES Pro

1,2,3,4

 

5,6,7,8

 

16 EYES Pro

1,2,3,4

 

5,6,7,8

 

9,10,11,12

13,14,15,16

 

MP2016

1,2,3,4,5,6,7,8,9,10,11,

12,13,14,15,16

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

MP3004

1,

 

2,

 

3,

 

4

 

MP3008

1,5

2,6

3,7

4,8

 

MP3016

1,5,9,13

 

2,6,10,14

 

3,7,11,15

4,8,12,16

 

 

 

MP5004

1

 

2

 

3

 

4

 

MP5008

1,

2,

3,

4,

5,

6,

7,

8

MP5016

1,9

2,10

3,11

4,12

5,13

6,14

7,15

8,16

 

That too many cameras were selected to be 640 x 480 resolution will result in overloading for system. For the further information please refer to our website contact your distribution.

7.UPS (Uninterruptible Power Supply)

It enhances the security for system to warn administrators and users if AC power fails and proceeds with system shutdown before the end of battery backup power is reached. The UPS device should be connected to your computer (refer to your UPS user’s guide) before the presetting of this task.

39

40

Image 24
Contents MicroJack Eyes Pro Digital Video Surveillance SystemMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 ENGTable of Contents Appendix a Remote Login with AN MODEM-TO-MODEM Video Card Specification 4 ports Package ContentsIntroduction Manual ConventionsHardware Recommendations Installing the Video Cards Connecting the MicroJack Video Cards Attaching CamerasEyes Pro Connecting External Sensor/Relay Coil Ratings at 20 oCExternal I/O Box Pin Signals Pin # Definition Relay OutputsDriver Installation Installing the Driver in Windows 98SE/MeCheck Your Windows Version Select Specify a location and click the Next button Installing the Driver in Windows Click the Yes button to proceed with the installation MicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Installing the Driver in Windows XP After the installation finished, click the Finish buttonRemove Your Video Card Driver Software Installation Installing MicroJack Eyes Pro/MP2016/MP3000/MP5000 SoftwareMicroJack Eyes Pro/MP2016/MP3000/MP5000 surveillance system MicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Product Update Product Present H/WSystem Configuration and Operation System ConfigurationSpecial Consideration Defrag Your Hard DiskBefore you start using it Miscellaneous Beep if no signal Auto RebootAsk for password when login Assign Recording DisksUPS Uninterruptible Power Supply VideoDisplay & Recording Rate Product Camera SetsUpdate RestoreDefault Camera IDPTZ Camera Setup Select a Com Port where PTZ camera connector connectedPreset Position Setup PTZ CameraMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Audio PropertiesRecord when start monitoring Record when motion detectedMotion Detection Sensitivity Record with Time StampContent ShieldEdit Start/ Stop MonitoringMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Test RelaysYou may right-click the mouse on Alarm to add a new alarm Alarm IDSound Alarm ConditionsMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 General Server IP Event LogEnable WebCam Server Ask for password when remote clients loginEnable Remote View server Multicast server via TCP/IP Domain Name & PasswordBy Date By WeekdayEnable Network Server AlarmMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Task MonitorMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Move CopyDelete all. Don’t make copies DeviceLocation Start TimeFiles between the time Start & End Days before scheduled datesConfigure e-map Import CameraMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Map MicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Edit Arrange Cameras, Sensors, and RelaysInformation Add New UsersAuthorization Level MicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 DeleteSystem Operation Product Models Eyes Pro/MP3004/MP5004Eyes Pro/MP2016/MP3016/MP5016 Display Modes10/13-Camera Display Full Screen Display Camera DisplayStart / Stop AutoScan Start / Stop Monitoring Start / Stop Audio RecordingCheck out Cameras, Sensors, Relays on the map Monitoring Cameras, Sensors, and RelaysSystem Configuration Camera BlueRed Camera GreenAudio Playback Select Files to PlaySelect Time MicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 PlayMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Zoom Print & SaveVideo Search MicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Exit Preset Position No PTZ Control Direction & SpeedMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Focus AutoPan Path GroupExit PTZ Controller Hard Disk Status Date / TimeUsing the WebCam Enable WebCamEnable Web Cam see Networking Check Enable WebCam serverUse the WebCam Accessing RemoteManager RemoteManagerAlarm Report SetupMicroJack User’s Manual Eyes Pro/MP2016/MP3000/MP5000 Login Display ModeMinimum Space & Safety Quota Camera Setup Network Setup Sensor StatusRelay Status Click Alarm Control to see the window for alarm status Operating the RemoteManagerBack to Main Menu Center ManagementCamera Setup, please refer to 6.2.3 Camera Setup section UserConneting quality Local Playback Zoom In/OutPrint SaveRemote Playback ChannelDirection Control Direction SpeedFocus out Zoom outStart Recording Exit RemoteManagerRotation Speed deg/s ClearAppendix a Remote Login with an Modem-to-Modem Connection Windows 98SE / Windows MeServer 130 Windows 134 136 138 Windows XP Select Accept incoming connections and click the NextButton 142 Button Enter the name of this connection and click the Next button User Login PasswordAppendix B Registering Domain Name on Ddns Server