MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
Audio
Click 
Audio to enter the audio page as below.
1.Enable
Check here to enable the automatic sound detection. The system will start recording upon detected volume greater than the sensitivity you set. Note that this function only works while the system is recording videos.
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
2.Detection Sensitivity
You can click 
to test the volume of your current environment as a reference when adjusting the sensitivity. The system defaults the sensitivity to 30%.
3.Properties
You can set the length of time for the system to continue recording the audio once activated. The system defaults to 5 seconds. The length of time you set determines the size of the .WAV file. (1 second long roughly takes up 8K of space.) The .WAV file format is
PCM 8KHz, 16bit, mono. To playback the audio files, you need
to go to 
Log Viewer.
4.Update
Click this button to update the setting.
5.Restore
Click 
to abort all the changes you made so far and restore your last settings.
6.Default
Click 
to change all values to their default settings.
45 | 46 |