MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
6.2.8 
Alarm Control
It is available to choose the server and decide to enable or disable the corresponding alarms.
1.Click Alarm Control to see the window for alarm status.
2.To enable an alarm, simply click on
in the Status column and
change the status to 
.
3.Click the OK button to save the setting.
6.2.9 
Back to Main Menu
Back to the main menu by clicking this button.
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
6.3 Operating the RemoteManager
6.3.1 
Center Management
Users can take advantage of this section to manage the connectable servers’ detailed information. The setting should be placed before you commence configuring the system at the first time.
There are two ways to connect server:
1.
Connection via Modem to Modem (refer to Appendix A for the connection):
First you should connect to the server manually via modem before accessing RemoteManager. Then, it is allowed to add a new server as a
2.
Connection via TCP/IP
Once the function “Enable Remote View server via TCP/IP” in the setting of Networking section in system configuration has been checked, you are allowed to add a new server via TCP/IP.
115 | 116 |