Intel MP2016, MP5000, MP3000 user manual Hard Disk Status, Date / Time

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

The red dot next to the camera/sensor number indicates that the event condition for this particular camera/sensor has been met. The green dot indicates no event occurs. And the blue dots means the video signal is too weak or the video cable has been disconnected (video loss.) The list below lists all events in time order.

You may click the Reset button to clear the triggered alarms including camera recording, siren or other relay outputs. However, this action requires a password to confirm your authorization level. Click the Save button to save all alarm records. Click the Close button to close the dialog box.

Hard Disk Status

This area shows the remaining hard disk space and time (in hours) for video recording. When you double-click on this area, a dialog box that lists all recording-related events and disk space will pop up.

You can click the Save button to save the events. Or click the Recycle button for the system to check if the hard disk needs to start recycling. Click the Cancel button to exit.

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

Network Status

This area presents you the current network status. You can also click

in the upper-right corner of the main surveillance window to get a full list of network related events.

Note that will flash in maroon color during data transmission.

Date / Time

Here shows the date and time.

99 100