Intel MP5000, MP2016, MP3000 user manual Alarm Report, Channel Status, Setup, Display Mode

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

Login

Once you first start the program by clicking the shortcut of Remote Manager on your desktop, a Login dialog right side will prompt you to enter the user ID and password to access to the program. Note that only “root” is the acceptable user ID for the initial access. And a User Management window for permitting the

beginning into the system will be seen. To set the setting of the permission, refer to the 6.3.1 Center Management for the detailed description.

Alarm Report

The image will turn into red and be flashing once an alarm is triggered. An alarm message with the detailed alarm status will be seen after you click on it. It will help you control the situation of surveillance.

Channel Status

An area where the status of all the channels will be shown as the following description and is with a tip of channel’s, server’s, camera’s names while your cursor points the button:

Dark Gray	All Disabled
Flashing Pale Gray Video loss
Azure	Normal and the image is displayed on the screen
Dull Blue	Normal but the image had been disabled to display
Pink Red	Recording and the image is displayed on the screen
Dark Red	Recording but the image had been disabled to display

If a camera is not enabled, the image from this camera will show as the image above (gray scale) on the screen.

MicroJack User’s Manual

EYES Pro/MP2016/MP3000/MP5000

If a camera is disconnected to the server or the signal from the server is disconnected to the local camera, the image will show as above on the screen. The signal will be picked up at an interval of one minute until it is received.

Display Mode

Select a display mode to arrange the presentation of the screen.

Full Screen	1-Cam Display
4-Cam Display	9-Cam Display	16-Cam Display

No matter what	channel mode you choose, you can assemble the
channels as you	wish by clicking Channel Status	to meet the

amount of the mode. For example, if you choose 4-Cam display mode, you can click 4-Cam display (1,4, 8, 13), (3, 5, 7, 8), or other groups of the channels to meet the quantity of 4 channels mode.

6.2 Setup

107 108