MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
6.3.3 
PTZ Control
Once you have installed a PTZ camera, the functional utility will help you to exert the control on the surveillance.
To enable the function, follow with the steps below:
1.Click PTZ Control to show the following window:
2.Designate a channel 
...
connected with PTZ camera for the further setting.
MicroJack User’s Manual
EYES Pro/MP2016/MP3000/MP5000
Preset Position Setup
Each PTZ camera can set 16 preset positions. You can move the camera to a desired preset position simply by clicking on the number of the preset position. To set a preset position, first select the number of the preset position and set the direction speed. Then configure the camera’s position with the directional control buttons, focus in/focus out buttons, and zoom in/zoom out buttons. Finally set the stay time, rotation speed, and click the Save button.
Direction Control
Adjust the camera’s direction with the following eight buttons; Up / Down / Left / Right / Upper Left / Bottom Left / Upper Right / Bottom Right.
Direction Speed
There are four speeds to decide the moving speed of the PTZ camera during adjusting Direction Control
Focus in
Decrease the focal length of the camera to focus on the image.
Focus out
Increase the focal length of the camera to focus on the image.
Zoom in
Zoom in to enlarge the image of the object.
Zoom out
Zoom out to reduce the image of the object.
123 | 124 |