Intel Raptor AT manual Adaptor ROM had control and has now returned

Raptor AT – Installation Guide
Checkpoint		Description
Code
	The adaptor ROM had control and has now returned
98h	control to BIOS POST. Performing any required
	processing after the option ROM returned control.
	Any initialization required after the option ROM test has
99h	completed. Configuring the timer data area and printer
	base address next.
9Ah	Set the timer and printer base addresses. Setting the RS-
	232 base address next.
	Returned after setting the RS-232 base address.
9Bh	Performing any required initialization before the
	Coprocessor test next.
9Ch	Required initialization before			the Coprocessor test is
	over. Initializing the Coprocessor next.
9Dh	Coprocessor	initialized.	Performing any			required
	initialization after the Coprocessor test next.
	Initialization after the Coprocessor test is complete.
9Eh	Checking the	extended	keyboard, keyboard			ID,	and
	Num Lock key next. Issuing the keyboard ID command
	next.
A2h	Displaying any soft errors next.
A3h	The soft error display		has	completed.	Setting		the
	keyboard typematic rate next.
A4h	The keyboard	typematic	rate	is set. Programming the
	memory wait states next.
A5h	Memory wait state programming is over. Clearing the
	screen and enabling parity and the NMI next.
	NMI and parity enabled. Performing any initialization
A7h	required before passing control to the adaptor ROM at
	E000 next.
	Initialization before passing control to the adaptor ROM
A8h	at E000h completed. Passing control to the adaptor
	ROM at E000h next.
	Returned from adaptor ROM at E000h control.
A9h	Performing any initialization required after the E000
	option ROM had control next.
AAh	Initialization	after E000 option ROM			control		has
	completed. Displaying the system configuration next.
ABh	Uncompressing the DMI data and executing DMI POST
	initialization next.
B0h	The system configuration is displayed.
B1h	Copying any code to specific areas.

64