USB 2.0 Controller
You can disable this function if you are not using onboard USB 2.0 feature.
Enabled | Enable USB 2.0 controller. (Default value) |
Disabled | Disable USB 2.0 controller. |
USB Keyboard Support
Enabled | Enable USB keyboard support. (Default value) |
Disabled | Disable USB keyboard support. |
USB Mouse Support
Enabled | Enable USB mouse support. (Default value) |
Disabled | Disable USB mouse support. |
Azalia Codec
Auto | Auto detect Azalia audio function. (Default value) |
Disabled | Disable Azalia audio function. |
Onboard H/W 1394
Enabled | Enable onboard IEEE1394 function. (Default value) |
Disabled | Disable this function. |
Onboard H/W LAN
Enabled | Enable onboard H/W LAN function. (Default value) |
Disabled | Disable this function. |
Onboard LAN Boot ROM
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Enabled | Enable this function. |
Disabled | Disable this function. (Default value) |
Onboard Serial Port 1
Auto | BIOS will automatically setup the port 1 address. |
3F8/IRQ4 | Enable onboard Serial port 1 and address is 3F8/IRQ4. (Default value) |
2F8/IRQ3 | Enable onboard Serial port 1 and address is 2F8/IRQ3. |
3E8/IRQ4 | Enable onboard Serial port 1 and address is 3E8/IRQ4. |
2E8/IRQ3 | Enable onboard Serial port 1 and address is 2E8/IRQ3. |
Disabled | Disable onboard Serial port 1. |
Onboard Parallel port
Disabled | Disable onboard LPT port. |
378/IRQ7 | Enable onboard LPT port and address is 378/IRQ7. (Default value) |
278/IRQ5 | Enable onboard LPT port and address is 278/IRQ5. |
3BC/IRQ7 | Enable onboard LPT port and address is 3BC/IRQ7. |
Parallel Port Mode
SPP | Using Parallel port as Standard Parallel Port. |
EPP | Using Parallel port as Enhanced Parallel Port. |
ECP | Using Parallel port as Extended Capabilities Port. |
ECP+EPP | Using Parallel port as ECP & EPP mode. (Default value) |
ECP Mode Use DMA
3 | Set ECP Mode Use DMA to 3. (Default value) |
|
1 | Set ECP Mode Use DMA to 1. |
|
|
|
|
| - 31 - | BIOS Setup |
English