7. Simple Copying
This section deals with the functions needed for simple, straight- forward copying jobs.
Some features and functions of this system cannot be activated simultaneously. The table after page 50 shows, which functions are compatible.
7.1 Automatic Copying
–Switch the unit on at the main switch (see also 6.1 Timer), and wait until the system is ready.
–The display shows the Basic screen.
–If the copier is also connected as a printer* and/or Fax*, press the COPY key, until the basic screen appears.
–If the Electronic Key Counter (EKC) is active, enter your pass- word and press START (see also 6.2 Electronic Key Counter).
–Insert original(s) into the RADF*, select the desired copy quantity and press START.
–Copies exit into the Finisher* or into the exit tray inside the unit.
Automatic Functions
These functions are active under AUTO RESET:
Automatic Paper Size Selection (APS)
–The copier automatically selects a tray with the paper size of the original.
–The original is copied same size.
–If the corresponding paper size is not available, the image will be rotated by 90° on the copy, where possible (e.g. A4 to A4R).
–Press OUTPUT if the automatic rotation does not work. Activate this function in the finishing screen.
–If no paper of a suitable size is available, a message will appear on the screen to supply paper of the required size.
–APS does not work with AMS or if an individual magnification ratio was entered.
Basic Screen
Automatic Magnification Selection (AMS)
–If you specify a particular tray to copy from resp. a particular paper size to copy onto, the system automatically calculates the correct magnification ratio.
–The original is copied in the corresponding size onto the copy paper.
–AMS does not work with APS or if an individual magnification ratio was entered.
Automatic Exposure (AE)
–The original is scanned and exposed with a suitable density.
–For a manual darker/lighter exposure press the corresponding arrows.
–The AUTO key on the Basic screen activates AE.
AUTO RESET
–A short time after the last copy or the last selection is made, the system returns to the initial settings.
–The key operator can adjust the interval until Auto Reset is performed, or switch off Auto Reset altogether.
24 | * Option |