Konica Minolta 7020 instruction manual Radf, Finisher, Duplex, Fold out this

10. Troubleshooting

Problem	Check	Solution
Paper jams occur repeatedly.	– Was thin or thick paper or OHP film	– Only feed special papers via the
	inserted into a tray and not into the	sheet bypass.
	sheet bypass?
After a paper jam has been	– Can you find other paper jams than	– Try to clear all paper jams that you
cleared, copying is still not	the indicated one?	can find.
possible.
Some screens look diffe-	– Did your key operator make special	– If you press the CHECK key, a list
rent from the illustrations	adjustments?	of all active settings will be called
in this operator manual.		up. Ask your key operator for more
		information.
Copies are reduced or	– Is AMS active?	– If a paper tray was selected in the
enlarged, even though the		PAPER SIZE screen, AMS is active.
full size ratio 1:1 has been		Select APS or press the 1.00
selected.		indicator.
The copying process is	– Is there a paper jam indication?	– Clear the paper jam.
interrupted.	– Have you reached the copy limit of	– Contact your key operator.
	your key counter?
RADF*
The RADF* indicator does	– Is the RADF* closed?	– Close the RADF* properly.
not light after pressing
AUTO RESET.
Originals are not fed by the	– Are original size and paper quality	– Thick and pasted originals must be
RADF*.	within the specifications?	positioned on the platen glass.
	– Were too many originals inserted	– Only up to 50 originals can be
	into the RADF*?	inserted at any one time.
Finisher*
The finisher* does not work.	– Is there a paper jam in the finisher*?	– Clear the paper jam.
	– Is the finisher* fully inserted into	– Securely push the finisher* into the
	the mainbody?	copier, until it clicks into place.
The stapling is in the wrong	– Is the automatic rotation active?	– Reposition the originals, so that the
place.		images will not be rotated.
Duplex
Automatic duplexing is not	– Check the duplex unit for a copy	– Remove the copy from the duplex
possible.	left in it.	unit.

Fold out this page:

The table Function Combinations shows, which functions can be selected together.

53