9. Special Functions
The Application Selection Screen displays all Special Functions.
The operator can suppress the access to particuler functions respectively can change the sequence of functions on the display. In this case, the display looks different.
The function keys are either white, black or shaded grey.
White | = Function is not selected |
Black | = Function is selected |
Grey Shade = Function is not available in this combination
This section deals with the system‘s special functions and explains how they are operated.
How to Select Special Functions:
–Pressing the APPLICATION key on the operating panel calls up the Application Selection screen.
–To activate a function, simply press the corresponding soft key.
–For some functions another screen is displayed, in which further selections must be made.
–To confirm your selections, press OK. If you press CANCEL, the function(s) will not be active resp. your adjustments will not be programmed.
–Pressing ALL CLEAR will cancel all previously selected special functions; and you will return to the Basic screen.
–After you have made your selections among the special func- tions, leave the Application Selection screen by pressing OK.
–The Basic screen will be displayed again.
–As long as any special function is selected, the indicator in the APPLICATION key is lit.
How to Change Special Function Settings:
–Press the APPLICATION key on the operating panel to call up the Application Selection screen.
–The keys of all selected functions are inverted, i.e. black with white type. To call up the adjustment screen for any activated function, press the inverted function key twice.
–Now make your adjustments in the screen, and confirm with OK, until you are back in the Basic screen.
How to Switch Off Special Functions:
–Pressing AUTO RESET cancels all present settings and returns the system to initial settings. If you only want to cancel a particular special function, call up the Application Selection screen.
–The keys of all selected functions are inverted, i.e. black with white type.
–Press the black key once. The key is now white with black type. The function is no longer active.
–Press OK to return to the Basic screen.
–If you want to cancel all special functions but keep the other copier settings, you can do this by pressing ALL CLEAR in the Application Selection screen.
34