9. Special Functions
9.1 Image Editing Functions
The following functions allow the editing of the original, so that the copy will show a changed image. You can for example shift the image, repeat a portion of the image, and so on.
9.1.1 Text/Photo Enhance
This function improves the reproduction of halftones. The copied image is lighter and has more detail.
–Select PHOTO for halftone photo originals.
–Select TEXT to improve the contrast in text originals.
–Select INCREASE CONTRAST for lightly printed originals.
Advice:
The key operator can adjust the density scale for each of the 3 modes (see Key Operator Manual, 15. Density Adjustment).
9.1.2 Auto Layout
9.1.3 Reverse Image
This function allows easy centering of the image on the copy. Careful positioning of the original is not necessary.
–Press the function key. Together with AUTO Layout the Non Image Area Erase function is automatically selected, but can be switched off.
–Originals can only be copied via the platen glas; the RADF* is not available and has to remain open, unless you switch off Non Image Area Erase.
–For duplex copying in this mode, you have to select the Store Mode and scan your originals.
–An A4 size copy is produced; but you can select a different size if required.
The white areas of the originals are reproduced in black, and vice versa.
* Option | 35 |