1. Advice on Installation and User Safety
1.1 Safety Warnings
Care Advice:
One precondition for a good copy quality is a clean platen glass! We suggest to clean the platen glass and the underside of the doucment feeder daily with a clean soft, possibly damp cloth or the special Konica cleaning liquid. Never use volatile or corrosive cleaners or solvents with this equipment!
Dear User,
The following concerns the safe use of your new equipment. Please take the time to read the following precautions carefully.
1.ATTENTION: While in use, a high voltage is generated inside the equipment. Do not touch to avoid electrical shock!
2.Do not attempt to repair any parts of this equipment. All repairs must be carried out exclusively by approved Konica service technicians.
3.While in use, some parts inside the unit get very hot. To avoid getting burned, follow instructions carefully when clearing paper jams and only touch designated parts.
4.In case of liquid running into the unit, immediately switch off the equipment, disconnect from the mains and inform your Konica service.
5.To disconnect the unit from the mains, pull the plug from the socket, which has to be located close to the equipment and must not be obstructed at any time!
6.While toner is not hazardous to your health, it should be kept out of reach of children. If toner is inhaled, swallowed or gets into contact with the eye, consult your doctor.
7.If the equipment has to be opened, only the green knobs and handles should be touched.
8.Before switching on the equipment, always ensure that the unit is securely closed.
9.This equipment is not to be confused with shelves or other office furniture. Do not obstruct the top of the unit with any items but keep free at all times.
10.Avoid dropping anything into the unit (e.g. paper clips, staples or else).
11.The touch screen of the operating panel is protected with a thin glass. Only make function selections with your fingertips, and avoid pressing on the display with hard or pointed items (e.g. pens).
12.Do not load stapled or folded paper into the document feeder, the paper trays or the sheet bypass.
6