7. Simple Copying
7.2 Position Originals
7.3 Store Mode
Advice:
Store Mode may also be activated directly in the Basic Screen with the SCAN key. Press SCAN: Originals are scanned into memory.
Touch STOP/CLEAR and AUTO RESET to switch Store Mode off again.
Insert Originals into RADF*
Originals in sizes A3 to A5R are processed automatically. Double- sided originals can be reversed automatically. Up to 50 originals can be inserted into the RADF* at one time (for documents of more than 50 originals, see 7.3 Store Mode).
–Close the RADF* securely.
–Insert originals
–Align the original guides to the original size.
Position Original on Platen Glass (also see page 9)
–Open the RADF*.
–Position the original
–Close the RADF*. It can also remain open, e.g. for
Auto-Start:
The operator can adjust the unit to start copying automatically,if an original is placed on the platen glass and the platen cover/ RADF* is closed. Originals in sizes A5 and larger are detected.
This function allows to scan originals via the platen glass into the image memory, in order to produce copied sets. It allows to process original sets of more than 50 pages through the RADF*, and lets you combine originals fed via the RADF* with originals placed on the platen glass.
–Press APPLICATION key to access the display shown.
–Touch Store Mode and OK to return to the Basic Screen.
–Make other required function selections.
–Position originals, which cannot be fed through the RADF*, one after the other onto the platen glass, starting with the first page.
–If you want to use the function to extend the RADF* capacity, insert a maximum of 50 originals into the RADF* at one time, starting with the beginning of the document.
–Always press the SCAN key, to scan originals into the image memory.
–You can also combine originals fed via the RADF* with originals positioned on the platen glas. In this case you have to keep the page order. Different sizes cannot be combined.
–When all originals have been scanned, start copying by pressing START.
25