Hardware Installations and Upgrades
L |
|
|
|
K |
| C |
|
|
|
| |
| E |
|
|
P | Q |
| B |
|
| A | |
K |
| D | |
|
| ||
|
|
| |
| H |
| F |
| G | G | |
|
| ||
| I | J |
|
TP01629
Figure 43. Removing the Power Distribution Board
15.Line up the holes on the replacement power distribution board with the power supply
16.Connect the main power, CPU power, and power signal from the power supply to the server board. In “Figure 44”, letter “C” shows the main power cable, letter “D” shows the CPU power cable, and letter “E” shows the power signal cable.
17.Connect the power cable to the power distribution board (see letter “F” in “Figure 44”) and connect the power cable to the backplane (see letter “G” in “Figure 44”).
18.If a SATA backplane is installed, connect the SATA cables. See letter “H” in “Figure 44”.
19.Reconnect the power supply fans.
20.If a SCSI backplane is installed, connect the SCSI cables. See letter “I” in “Figure 44”.
21.Install the power supply modules. For instructions see “Installing a
22.Install the power supply air duct. For instructions see “Installing the Power Supply Air Duct”.
Intel® Server Chassis SR1450 User Guide | 59 |