Safety Precautions

Checking the power supply rating

For your own safety please read the following instructions carefully before attempting to connect this unit to the mains.

Check that the rear of your unit indicates the correct supply voltage. If your mains supply voltage is different, consult your dealer.

This unit is designed to operate only on the supply voltage and type that is indicated on the rear panel of the unit. Connecting to other power sources may damage the unit.

This equipment must be switched off when not in use and must not be used unless correctly earthed. To reduce the risk of electric shock, do not remove the unit's cover (or back). There are no user serviceable parts inside. Refer servicing to qualified service personnel. If the power cord is fitted with a moulded mains plug the unit must not be used if the plastic fuse carrier is not in place.

The lightning flash with the arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated 'dangerous voltage' within the product's enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance instructions in the service literature relevant to this appliance.

This product complies with European Low Voltage (73/23/EEC) and Electromagnetic Compatibility (89/336/EEC) Directives when used and installed according to this instruction manual. For continued compliance only Cambridge Audio accessories should be used with this product and servicing must be referred to qualified service personnel.

Plug fitting instructions (UK only)

The cord supplied with this appliance is factory fitted with a 13A mains plug fitted with a 3A fuse inside. If it is necessary to change the fuse, it is important that a 3A one is used. If the plug needs to be changed because it is not suitable for your socket, or becomes damaged, it should be cut off and an appropriate plug fitted following the wiring instructions below. The plug must then be disposed of safely, as insertion into a 13A socket is likely to cause an electrical hazard. Should it be necessary to fit a 3-pin BS mains plug to the power cord the wires should be fitted as shown in this diagram. The colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug. Connect them as follows:-

The wire which is coloured BLUE must be connected to the terminal which is marked with the letter 'N' or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal which is marked with the letter 'L' or coloured RED

The wire which is coloured GREEN/YELLOW must be connected to the terminal which is marked with the letter 'E' or coloured

GREEN.

If your model does not have an earth wire, then disregard this instruction.

If a 13 Amp (BS 1363) plug is used, a 3 Amp fuse must be fitted, or if any other type of plug is used a 3 Amp or 5 Amp fuse must be fitted, either in the plug or adaptor, or on the distribution board.

4azur integrated amplifier

340A specifications

The Cambridge Audio 340A is a well-regarded integrated amplifier that captures the essence of high-fidelity sound, appealing to both audiophiles and casual listeners alike. This amplifier is a part of the popular Azur series, which is known for its combination of premium quality and affordability.

One of the standout features of the Cambridge Audio 340A is its power output. With 50 watts per channel into 8 ohms, it is capable of driving a wide range of speakers, ensuring a dynamic audio experience across various genres of music. The amplifier’s low distortion levels contribute to clear and articulate sound reproduction, making it an ideal choice for those who prioritize audio clarity.

The 340A incorporates advanced audio technologies, including a toroidal transformer, which aids in minimizing electrical noise and improving overall efficiency. This transformer design not only enhances the amplifier's performance but also contributes to a more compact and manageable unit, allowing for easy integration into any audio setup.

Another notable characteristic is the extensive connectivity options offered by the 340A. It features multiple line-level inputs, allowing users to connect various sources such as CD players, turntables, and streaming devices seamlessly. Additionally, it includes a dedicated phono stage, making it particularly appealing to vinyl enthusiasts who desire high-quality sound from their record collections.

The design of the Cambridge Audio 340A is both functional and elegant, with a minimalist front panel that includes a volume knob, input selector, and an LED power indicator. Its rugged build quality ensures durability, while its stylish appearance blends well with modern audio equipment.

The amplifier also includes tone controls that allow users to adjust bass and treble levels according to their personal preferences. This feature adds an extra layer of customization, enabling listeners to tailor the sound to their liking based on their listening environment.

In summary, the Cambridge Audio 340A is a versatile and high-performing integrated amplifier that boasts a powerful output, excellent sound quality, advanced technologies, and a user-friendly design. Its combination of features makes it an outstanding choice for anyone looking to enhance their audio experience without breaking the bank.