Tascam CC-222MKII CD player-Repeat play, Intro check, Setting the a and B repeat points

Page 23

4 – CD player—Repeat play

Clear the program by pressing PLAY MODE until the display shows Continue. The program is also cleared when the disc tray is opened, and if the STOP key is pressed when playback is stopped in pro- grammed order mode.

The programmed play order is not memorized when power is turned off.

If an attempt is made to enter more than 25 program steps, the message PGM Full ! appears on the display.

Repeat play

The unit can repeat the whole of the disc (or pro- gram), an A–B portion set as described here, or the current track only.

NOTE

Selecting the repeat mode is only possible using the remote control unit. It is not possible to select the repeat mode using the main unit alone.

1The unit should be in playback, pause or stop mode.

Continue to press the REPEAT key so that the display shows Repeat 1 (the REPEAT 1

indicator lights) to repeat one track, Repeat ALL (the REPEAT ALL indicator lights) to repeat the whole disc or program, Repeat A-B(the REPEAT A-Bindicator lights) to repeat between two points as explained below.

2If playback has not started, restart it.

To cancel repeat mode, press the REPEAT key so that the display shows Repeat OFF and the REPEAT indicator goes out. Pressing STOP also cancels repeat mode.

Setting the A and B repeat points

While the REPEAT A-Bindicator is lit, you can set the points on a finalized disc between which playback should loop.

1Start playback before the point where you want the loop to start.

2Press the A-B key (remote control) at the point where the loop is to start.

3Press the A-B key once more at the point at where the loop is to end.

Playback jumps back to the first (A) point and continues to the second (B) point and then returns to the A point again, repeating the loop.

Cancel the A-B repeat mode by pressing the A-Bkey.

NOTE

If the A and B points are too close together, A-B looping is not possible.

The A and B points can be on either side of a track divi- sion, but there may be a gap in the loop during play- back in this case.

Intro check

This is a useful facility to skip through the first 10 seconds of all the tracks on a CD to refresh your memory of the contents of the CD.

Pressing INTRO CHECK again cancels the mode and returns to normal playback.

NOTE

1With the disc stopped, press the INTRO CHECK key.

The first 10 seconds of each track on the disc will be played. Press STOP to stop this play- back process.

This function is only available from the remote control unit. It is not possible to use this function with the main unit only.

TASCAM CC-222MKII Owner’s Manual 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents CD Recorder/Cassette Deck Important Safety Precautions Important Safety Instructions Safety Information Contents Introduction Some notes and precautionsSupplied accessories Beware of condensation Introduction-Some notes and precautionsRack-mounting the unit Environmental considerationsAbout CD-R and CD-RW discs Introduction-FinalizingFinalizing About tapesAdditional notes with regard to CD-R and CD-RW discs Recordable discsHandling of compact discs Recommended media Use of the remote control unitNever use a stabilizer or printable discs About this manual Introduction-About this manualFeatures and controls Phones jack and volume control Features and controls-Rear panel featuresRear panel features Monitor TAPE/MIX/DISC switchRemote control features Features and controls-Remote control featuresNumber keys 0 through 10, +10, Continuous tape/CD playback Cassette operationsPlayback operations Dubbing tapes from the CD deck Cassette operations-Recording operationsRecording operations Bypassing the Input level for dubbing Cassette operations-Recording tapes from the Phono deckRecording tapes from the Phono deck Dubbing to tape from the middle of a CDOther tape functions and features Cassette operations-Other recording featuresOther recording features Search keys Cassette operations-Other tape functions and featuresFast forward and rewind Track search CD playerSimple playback operations Time display modesProgrammed order playback CD player-Playback modesPlayback modes Intro check Setting the a and B repeat pointsCD player-Repeat play Repeat playAuto spacing Timer playbackCD player-Auto spacing Input monitoring Signal volumeRecording CDs Input selectionFrequency conversion Recording CDs-Basic recordingBasic recording Dubbing from tape to disc Recording CDs-Dubbing from tape to discDubbing to CD from the middle of the tape Recording CDs-From the Riaa Phono inputsFrom the Riaa Phono inputs Synchronized recording Setting the trigger levelRecording CDs-Advanced recording Advanced recordingSync recording stop Sync recording startRec mute function Automatic track divisionTo perform a fade-out Fade-in and fade-outTo perform a fade-in Erasing tracks After recordingErasing Unfinalizing CD-RW discsRefreshing a disc After recording-ErasingErasing a whole disc After recording-Erasing Troubleshooting Reference and specificationsCD recorder section Reference and specifications-Menu itemsSpecifications Menu itemsCassette recorder section Reference and specifications-SpecificationsPhono input and headphones General specifications Reference and specifications-Dimensional drawingDimensional drawing Tape maintenanceCC-222@#
Related manuals
Manual 2 pages 55.43 Kb

CC-222MKII specifications

The Tascam CC-222MKII is a versatile and reliable combination deck that has been designed for professional audio applications. Combining the best of both worlds, this deck features a high-quality CD player and a cassette recorder, making it an ideal solution for musicians, broadcasters, and sound engineers. One of the main features of the CC-222MKII is its ability to play and record CDs as well as standard cassette tapes, which provides users with flexibility in audio formats.

The CD player in the CC-222MKII is compatible with various disc formats, including CD-R and CD-RW, allowing users to play back personalized audio compilations or recordings. Tascam has integrated a high-performance DAC (Digital to Analog Converter) within the unit, which ensures accurate sound reproduction with minimal distortion. Additionally, the player accommodates seamless playback, so users can easily transition between tracks or scan through content, enhancing the overall listening experience.

In terms of cassette functionality, the CC-222MKII offers a built-in cassette deck that utilizes a high-quality transport mechanism. This ensures smooth and reliable tape playback and recording. The deck features both playback and record capabilities for standard compact cassettes, with a user-friendly interface making it easy to navigate controls and manage audio content.

The Tascam CC-222MKII also incorporates several crucial technologies to support its functionality. One notable feature is the built-in A/D (analog to digital) and D/A (digital to analog) converters, which facilitate high-quality recording and playback. Furthermore, the unit includes a range of input options, including XLR and RCA connectors, allowing users to connect external microphones, mixers, or other audio equipment.

Another key characteristic of the CC-222MKII is its ease of use. The deck is equipped with a large LCD display that provides clear information about the current playing track, time elapsed, and other essential data. The intuitive layout and handling make it accessible for both beginners and seasoned professionals.

Moreover, the durable construction of the Tascam CC-222MKII ensures longevity and reliability in various settings, whether in a studio environment or on the road. Its compact design allows for easy integration into any audio setup, making it a popular choice for a wide range of users seeking versatility and performance in an all-in-one audio solution.
Top Page Image Contents