Tascam CC-222MKII owner manual Automatic track division, Rec mute function

Page 31

5 – Recording CDs—Advanced recording

Automatic track division

The trigger level, as set above (“Synchronized recording” on page 29) can also be used to divide tracks if the A-TRACK (auto track) function is enabled.

When this function is enabled, the unit automatically inserts a track division in the recorded material when:

•recording digitally from MD, CD or DAT, an incre- ment signal is detected and the sound level rises above the threshold:

 

Track increment

CD-RW

 

increments

 

from source

 

track

level

 

 

 

S_LVL

 

 

 

 

time

or

•increment signals are unavailable (e.g. analog recording or digital sources other than MD. CD or DAT) and the sound level has dropped below the threshold for more than two seconds, and sound has re-started:

 

Track

 

increment

 

At least 2

level

seconds

S_LVL

 

 

time

To enable or disable automatic track division:

1With a recordable disc inserted, press the MENU key repeatedly until A_TRACK>XX is shown, where XX may be ON or OFF.

2Turn the MULTI DIAL or use the SKIP keys to change the value as required.

The A-TRACKindicator at the top right of the display lights when the auto track function is enabled.

3Press the RECORD key.

NOTE

When recording certain types of material (e.g. certain types of classical music or spoken word) through the analog connections, since the track divisions are deter- mined by relative silence, it is possible that spurious track divisions will be inserted. Under these conditions, it may be better to use manual track division (“Manual track division” on page 27).

It is not possible to turn this function on and off when recording.

However, if recording through a digital connection, the track number will be incremented only when a track division signal is received, followed by a rise in volume.

level

Track start signal

received

 

Track incremented

S_LVL

time

A fall and subsequent rise in volume alone when recording digitally from CD, MD or DAT is not sufficient to trigger an automatic track increment.

Digital recording from CD, MD and DAT

level

Long "pause" in signal, but track is not incremented

S_LVL

time

Rec mute function

The rec mute function allows instant cut-off of the

The display shows REC MUTE, the meters

input signal, and records four seconds of silence on

stop displaying the current level and the

the disc.

monitored sound is cut.

1 While recording is in progress, press the REC

2 After about four seconds, the unit enters

MUTE key.

record ready mode.

TASCAM CC-222MKII Owner’s Manual 31

Page 30 Page 32
Image 31
Page 30 Page 32
Contents CD Recorder/Cassette Deck Important Safety Precautions Important Safety Instructions Safety Information Contents Supplied accessories Some notes and precautionsIntroduction Beware of condensation Introduction-Some notes and precautionsRack-mounting the unit Environmental considerationsAbout CD-R and CD-RW discs Introduction-FinalizingFinalizing About tapesHandling of compact discs Recordable discsAdditional notes with regard to CD-R and CD-RW discs Never use a stabilizer or printable discs Use of the remote control unitRecommended media About this manual Introduction-About this manualFeatures and controls Phones jack and volume control Features and controls-Rear panel featuresRear panel features Monitor TAPE/MIX/DISC switchRemote control features Features and controls-Remote control featuresNumber keys 0 through 10, +10, Playback operations Cassette operationsContinuous tape/CD playback Recording operations Cassette operations-Recording operationsDubbing tapes from the CD deck Bypassing the Input level for dubbing Cassette operations-Recording tapes from the Phono deckRecording tapes from the Phono deck Dubbing to tape from the middle of a CDOther recording features Cassette operations-Other recording featuresOther tape functions and features Fast forward and rewind Cassette operations-Other tape functions and featuresSearch keys Track search CD playerSimple playback operations Time display modesPlayback modes CD player-Playback modesProgrammed order playback Intro check Setting the a and B repeat pointsCD player-Repeat play Repeat playCD player-Auto spacing Timer playbackAuto spacing Input monitoring Signal volumeRecording CDs Input selectionBasic recording Recording CDs-Basic recordingFrequency conversion Dubbing from tape to disc Recording CDs-Dubbing from tape to discFrom the Riaa Phono inputs Recording CDs-From the Riaa Phono inputsDubbing to CD from the middle of the tape Synchronized recording Setting the trigger levelRecording CDs-Advanced recording Advanced recordingSync recording stop Sync recording startRec mute function Automatic track divisionTo perform a fade-in Fade-in and fade-outTo perform a fade-out Erasing tracks After recordingErasing Unfinalizing CD-RW discsErasing a whole disc After recording-ErasingRefreshing a disc After recording-Erasing Troubleshooting Reference and specificationsCD recorder section Reference and specifications-Menu itemsSpecifications Menu itemsPhono input and headphones Reference and specifications-SpecificationsCassette recorder section General specifications Reference and specifications-Dimensional drawingDimensional drawing Tape maintenanceCC-222@#
Related manuals
Manual 2 pages 55.43 Kb

CC-222MKII specifications

The Tascam CC-222MKII is a versatile and reliable combination deck that has been designed for professional audio applications. Combining the best of both worlds, this deck features a high-quality CD player and a cassette recorder, making it an ideal solution for musicians, broadcasters, and sound engineers. One of the main features of the CC-222MKII is its ability to play and record CDs as well as standard cassette tapes, which provides users with flexibility in audio formats.

The CD player in the CC-222MKII is compatible with various disc formats, including CD-R and CD-RW, allowing users to play back personalized audio compilations or recordings. Tascam has integrated a high-performance DAC (Digital to Analog Converter) within the unit, which ensures accurate sound reproduction with minimal distortion. Additionally, the player accommodates seamless playback, so users can easily transition between tracks or scan through content, enhancing the overall listening experience.

In terms of cassette functionality, the CC-222MKII offers a built-in cassette deck that utilizes a high-quality transport mechanism. This ensures smooth and reliable tape playback and recording. The deck features both playback and record capabilities for standard compact cassettes, with a user-friendly interface making it easy to navigate controls and manage audio content.

The Tascam CC-222MKII also incorporates several crucial technologies to support its functionality. One notable feature is the built-in A/D (analog to digital) and D/A (digital to analog) converters, which facilitate high-quality recording and playback. Furthermore, the unit includes a range of input options, including XLR and RCA connectors, allowing users to connect external microphones, mixers, or other audio equipment.

Another key characteristic of the CC-222MKII is its ease of use. The deck is equipped with a large LCD display that provides clear information about the current playing track, time elapsed, and other essential data. The intuitive layout and handling make it accessible for both beginners and seasoned professionals.

Moreover, the durable construction of the Tascam CC-222MKII ensures longevity and reliability in various settings, whether in a studio environment or on the road. Its compact design allows for easy integration into any audio setup, making it a popular choice for a wide range of users seeking versatility and performance in an all-in-one audio solution.
Top Page Image Contents