Tascam CC-222MKII owner manual After recording-Erasing, Erasing a whole disc, Refreshing a disc

Page 34

6 – After recording—Erasing

1With the disc loaded, and the unit in stop mode, press the ERASE key.

2If the display does not show ERASE XX- XX?, where XX is the number of the last track recorded on the disc, turn the MULTI DIAL or use the SKIP keys until it is displayed.

3Turn the MULTI DIAL or use the SKIP keys to change the number of the first track to be erased. The highest value that this number can take is the last track recorded (for exam- ple, if 17 tracks have been recorded on the disc, 17-17means that the last track only, number 17, will be erased). The lowest value that this number can take is 2 (if this num- ber was 1, the whole disc would be erased, as described below).

If you do not want to proceed with the erase operation, press any other key (such as the STOP key).

NOTE

If only one track has been recorded on the disc, only the “erase disc” option (, “Erasing a whole disc”) is avail- able.

4When the range of tracks to be erased has been selected, press the MULTI DIAL or the

ENTER key.

NOTE

This operation cannot be undone. If you are going to erase a track or tracks, make sure that they are record- ings that you really want to erase!

If the erase operation has been selected, the word ERASE flashes on the display, and the timer starts counting down.

At the end of the countdown period, the word Complete appears briefly on the display, and the display returns to the track/time display.

Erasing a whole disc

When you want to erase a whole disc (all the tracks on a disc), follow the procedure below:

1With the disc loaded, and the unit in stop mode, press the ERASE key.

2Turn the MULTI DIAL or use the SKIP keys until the display shows ERASE DISC?.

If you do not want to proceed with the erase operation, press any other key (such as the STOP key).

3To erase the contents of the disc, press the

MULTI DIAL or the ENTER key.

NOTE

This operation cannot be undone. If you are going to erase a disc, make sure that it contains only recordings that you really want to erase!

If the erase operation has been selected, the word ERASE flashes on the display, and the timer starts counting down a time value shown on the display.

At the end of the countdown period, the word Complete appears briefly on the display, and the display returns to the track/time display.

Refreshing a disc

If a CD-RW disc has been corrupted at any point (e.g. power has been cut off in the middle of a finalize operation, etc.), or has been used in a computer or another piece of equipment that makes it unreadable, it is possible to “refresh” the disc to make it usable again. This operation destroys all data on the disc. Finalized CD-RW discs must be unfinalized before a refresh operation. This operation has no effect on the audio quality.

1With the disc loaded, and the unit in stop mode, press the ERASE key.

2Turn the MULTI DIAL or use the SKIP keys until the display shows DISC REFRESH.

3To refresh the disc, press the MULTI DIAL or the ENTER key.

If you do not want to proceed with the refresh operation, press any other key (such as the STOP key).

NOTE

This operation cannot be undone. If you are going to refresh a disc, make sure that it contains only recordings that you really want to erase!

If the refresh operation has been selected, the words ERASE XX:XX are shown on the

34 TASCAM CC-222MKII Owner’s Manual

Page 33 Page 35
Image 34
Page 33 Page 35
Contents CD Recorder/Cassette Deck Important Safety Precautions Important Safety Instructions Safety Information Contents Supplied accessories Some notes and precautionsIntroduction Environmental considerations Introduction-Some notes and precautionsRack-mounting the unit Beware of condensationAbout tapes Introduction-FinalizingFinalizing About CD-R and CD-RW discsHandling of compact discs Recordable discsAdditional notes with regard to CD-R and CD-RW discs Never use a stabilizer or printable discs Use of the remote control unitRecommended media Introduction-About this manual About this manualFeatures and controls Monitor TAPE/MIX/DISC switch Features and controls-Rear panel featuresRear panel features Phones jack and volume controlFeatures and controls-Remote control features Remote control featuresNumber keys 0 through 10, +10, Playback operations Cassette operationsContinuous tape/CD playback Recording operations Cassette operations-Recording operationsDubbing tapes from the CD deck Dubbing to tape from the middle of a CD Cassette operations-Recording tapes from the Phono deckRecording tapes from the Phono deck Bypassing the Input level for dubbingOther recording features Cassette operations-Other recording featuresOther tape functions and features Fast forward and rewind Cassette operations-Other tape functions and featuresSearch keys Time display modes CD playerSimple playback operations Track searchPlayback modes CD player-Playback modesProgrammed order playback Repeat play Setting the a and B repeat pointsCD player-Repeat play Intro checkCD player-Auto spacing Timer playbackAuto spacing Input selection Signal volumeRecording CDs Input monitoringBasic recording Recording CDs-Basic recordingFrequency conversion Recording CDs-Dubbing from tape to disc Dubbing from tape to discFrom the Riaa Phono inputs Recording CDs-From the Riaa Phono inputsDubbing to CD from the middle of the tape Advanced recording Setting the trigger levelRecording CDs-Advanced recording Synchronized recordingSync recording start Sync recording stopAutomatic track division Rec mute functionTo perform a fade-in Fade-in and fade-outTo perform a fade-out Unfinalizing CD-RW discs After recordingErasing Erasing tracksErasing a whole disc After recording-ErasingRefreshing a disc After recording-Erasing Reference and specifications TroubleshootingMenu items Reference and specifications-Menu itemsSpecifications CD recorder sectionPhono input and headphones Reference and specifications-SpecificationsCassette recorder section Tape maintenance Reference and specifications-Dimensional drawingDimensional drawing General specificationsCC-222@#
Related manuals
Manual 2 pages 55.43 Kb

CC-222MKII specifications

The Tascam CC-222MKII is a versatile and reliable combination deck that has been designed for professional audio applications. Combining the best of both worlds, this deck features a high-quality CD player and a cassette recorder, making it an ideal solution for musicians, broadcasters, and sound engineers. One of the main features of the CC-222MKII is its ability to play and record CDs as well as standard cassette tapes, which provides users with flexibility in audio formats.

The CD player in the CC-222MKII is compatible with various disc formats, including CD-R and CD-RW, allowing users to play back personalized audio compilations or recordings. Tascam has integrated a high-performance DAC (Digital to Analog Converter) within the unit, which ensures accurate sound reproduction with minimal distortion. Additionally, the player accommodates seamless playback, so users can easily transition between tracks or scan through content, enhancing the overall listening experience.

In terms of cassette functionality, the CC-222MKII offers a built-in cassette deck that utilizes a high-quality transport mechanism. This ensures smooth and reliable tape playback and recording. The deck features both playback and record capabilities for standard compact cassettes, with a user-friendly interface making it easy to navigate controls and manage audio content.

The Tascam CC-222MKII also incorporates several crucial technologies to support its functionality. One notable feature is the built-in A/D (analog to digital) and D/A (digital to analog) converters, which facilitate high-quality recording and playback. Furthermore, the unit includes a range of input options, including XLR and RCA connectors, allowing users to connect external microphones, mixers, or other audio equipment.

Another key characteristic of the CC-222MKII is its ease of use. The deck is equipped with a large LCD display that provides clear information about the current playing track, time elapsed, and other essential data. The intuitive layout and handling make it accessible for both beginners and seasoned professionals.

Moreover, the durable construction of the Tascam CC-222MKII ensures longevity and reliability in various settings, whether in a studio environment or on the road. Its compact design allows for easy integration into any audio setup, making it a popular choice for a wide range of users seeking versatility and performance in an all-in-one audio solution.
Top Page Image Contents