Tascam CC-222MKII Cassette operations, Playback operations, Continuous tape/CD playback

Page 16

3 – Cassette operations

Note the following when loading tapes:

1Use your finger or a pencil to turn the cas- sette's hub and take up any slack tape.

NOTE

Avoid touching the tape. Fingerprints attract dust and dirt.

2Press the EJECT key to open the cassette compartment door.

3Load the cassette tape with its open edge fac- ing down.

4Gently close the compartment door.

NOTE

The cassette holder cannot be opened during recording or playback.

If the power has been switched off during play or recording, ejecting the cassette may be impossible. In such a case, switch the power on and press the EJECT key again.

Playback operations

1With the power on, set the REV MODE switch to the required tape mode.

uSingle-sided playback

jOne side, then the other side, then stop

pOne side, then the other side, then the first side again, etc.

2Load a pre-recorded cassette with its open edge facing down and side A facing toward you.

3Set the Dolby NR system on or off.

4Press either PLAY key to start playback.

5Adjust the volume with the amplifier's vol- ume control.

6To stop playback, press the STOP key.

Continuous tape/CD playback

1Load the tape (as described above) to be played back into the unit. Load the disc (use the OPEN/CLOSE key and load the disc recorded side downwards and close the tray).

2Press the CD-TAPE CONT PLAY key.

3Press either of the PLAY keys of the tape deck, or the PLAY key of the CD deck.

Playback will start on the appropriate unit. When playback reaches the end of the disc, or the end of the tape (either one side or two

sides, as determined by the REV MODE set- ting), playback starts on the other unit.

Media (tape or disc) can be changed in the unit that is not playing.

NOTE

The cassette deck and CD deck can be used to play back through different outputs, or the LINE OUTPUTS 2 jacks can be used for both disc and tape playback. How- ever, note that if both are playing, the cassette takes priority (the disc will not be heard through these out- puts). Disc playback is always through the LINE OUTPUTS 1 jacks.

16 TASCAM CC-222MKII Owner’s Manual

Page 15 Page 17
Image 16
Page 15 Page 17
Contents CD Recorder/Cassette Deck Important Safety Precautions Important Safety Instructions Safety Information Contents Supplied accessories Some notes and precautionsIntroduction Introduction-Some notes and precautions Rack-mounting the unitEnvironmental considerations Beware of condensationIntroduction-Finalizing FinalizingAbout tapes About CD-R and CD-RW discsHandling of compact discs Recordable discsAdditional notes with regard to CD-R and CD-RW discs Never use a stabilizer or printable discs Use of the remote control unitRecommended media Introduction-About this manual About this manualFeatures and controls Features and controls-Rear panel features Rear panel featuresMonitor TAPE/MIX/DISC switch Phones jack and volume controlFeatures and controls-Remote control features Remote control featuresNumber keys 0 through 10, +10, Playback operations Cassette operationsContinuous tape/CD playback Recording operations Cassette operations-Recording operationsDubbing tapes from the CD deck Cassette operations-Recording tapes from the Phono deck Recording tapes from the Phono deckDubbing to tape from the middle of a CD Bypassing the Input level for dubbingOther recording features Cassette operations-Other recording featuresOther tape functions and features Fast forward and rewind Cassette operations-Other tape functions and featuresSearch keys CD player Simple playback operationsTime display modes Track searchPlayback modes CD player-Playback modesProgrammed order playback Setting the a and B repeat points CD player-Repeat playRepeat play Intro checkCD player-Auto spacing Timer playbackAuto spacing Signal volume Recording CDsInput selection Input monitoringBasic recording Recording CDs-Basic recordingFrequency conversion Recording CDs-Dubbing from tape to disc Dubbing from tape to discFrom the Riaa Phono inputs Recording CDs-From the Riaa Phono inputsDubbing to CD from the middle of the tape Setting the trigger level Recording CDs-Advanced recordingAdvanced recording Synchronized recordingSync recording start Sync recording stopAutomatic track division Rec mute functionTo perform a fade-in Fade-in and fade-outTo perform a fade-out After recording ErasingUnfinalizing CD-RW discs Erasing tracksErasing a whole disc After recording-ErasingRefreshing a disc After recording-Erasing Reference and specifications TroubleshootingReference and specifications-Menu items SpecificationsMenu items CD recorder sectionPhono input and headphones Reference and specifications-SpecificationsCassette recorder section Reference and specifications-Dimensional drawing Dimensional drawingTape maintenance General specificationsCC-222@#
Related manuals
Manual 2 pages 55.43 Kb

CC-222MKII specifications

The Tascam CC-222MKII is a versatile and reliable combination deck that has been designed for professional audio applications. Combining the best of both worlds, this deck features a high-quality CD player and a cassette recorder, making it an ideal solution for musicians, broadcasters, and sound engineers. One of the main features of the CC-222MKII is its ability to play and record CDs as well as standard cassette tapes, which provides users with flexibility in audio formats.

The CD player in the CC-222MKII is compatible with various disc formats, including CD-R and CD-RW, allowing users to play back personalized audio compilations or recordings. Tascam has integrated a high-performance DAC (Digital to Analog Converter) within the unit, which ensures accurate sound reproduction with minimal distortion. Additionally, the player accommodates seamless playback, so users can easily transition between tracks or scan through content, enhancing the overall listening experience.

In terms of cassette functionality, the CC-222MKII offers a built-in cassette deck that utilizes a high-quality transport mechanism. This ensures smooth and reliable tape playback and recording. The deck features both playback and record capabilities for standard compact cassettes, with a user-friendly interface making it easy to navigate controls and manage audio content.

The Tascam CC-222MKII also incorporates several crucial technologies to support its functionality. One notable feature is the built-in A/D (analog to digital) and D/A (digital to analog) converters, which facilitate high-quality recording and playback. Furthermore, the unit includes a range of input options, including XLR and RCA connectors, allowing users to connect external microphones, mixers, or other audio equipment.

Another key characteristic of the CC-222MKII is its ease of use. The deck is equipped with a large LCD display that provides clear information about the current playing track, time elapsed, and other essential data. The intuitive layout and handling make it accessible for both beginners and seasoned professionals.

Moreover, the durable construction of the Tascam CC-222MKII ensures longevity and reliability in various settings, whether in a studio environment or on the road. Its compact design allows for easy integration into any audio setup, making it a popular choice for a wide range of users seeking versatility and performance in an all-in-one audio solution.
Top Page Image Contents