Tascam CC-222MKII owner manual Recording CDs-Dubbing from tape to disc

Page 27

5 – Recording CDs—Dubbing from tape to disc

Playing back tracks

Although an unfinalized disc cannot be played back on an ordinary CD player, the CC-222MKII can play back tracks that have been recorded.

Use the MULTI DIAL control or the SKIP keys to select a track for playback.

Time display while recording

While a recordable disc is being played back, the four time display modes available in normal play- back as described in , “Time display modes”: TOTAL, TOTAL REMAIN, track REMAIN and elapsed track time.

However, during recording there are fewer options available (obviously, the unit cannot see into the future and know how much time remains of the track which is being currently recorded!). While recording, until recording has taken place for at least 4 seconds, the time display mode cannot be changed.

When in record or record ready mode, repeated presses of the DISPLAY key cycle between display- ing the remaining time left for recording on the disc (TOTAL REMAIN) and the elapsed time of the track cur- rently being recorded (no indicator lit).

When playback is stopped at the start of a recordable disc, there are only two options available: TOTAL (the total time recorded so far on the disc) and TOTAL REMAIN (the total time available on the disc for further recording).

Manual track division

It is possible to divide the recording into tracks “on the fly” while recording.

While recording is taking place, press the RECORD key. The current track number is incremented by one.

For details of automatic track division while record- ing, see “Automatic track division” on page 31.

NOTE

According to the “Red Book” (the specification for audio CDs), a track cannot be less than four seconds in length, and there can be a maximum of 99 tracks on an audio CD. Bear these limitations in mind when adding track divisions.

Full disc

If recording a long program, when there is no space remaining on the disc for recording, as shown by the time display (see “Time display while recording” on page 27), the display shows Disc Full!! for a few seconds (and may show PMA Writing after this).

If the disc is a CD-RW, the final track can be erased, if required (see “Erasing tracks” on page 33) and the disc then finalized. If the disc is a CD-R, it must be finalized prior to use (see “Finalizing” on page 33).

Dubbing from tape to disc

When dubbing from tape to disc, follow the instruc- tions here.

1Load the tape with the side that will be recorded first to be played first. Set the Dolby, etc. as well as the reverse mode.

2Load a recordable disc.

3Use the MENU key to set the dubbing volume to THRU to bypass the input level control (see “Bypassing the INPUT level for dub- bing” on page 18).

NOTE

Note that while dubbing with auto track enabled, the start trigger level (see “Synchronized recording” on page 29) is set to –30dB.

4Press the DUB 1 key.

The CD goes into record ready. The tape rewinds to the start of the tape and starts playing back. The CD recorder starts record- ing.

5When the available recording time on the disc is finished, or the tape has stopped play- ing according to the reverse mode setting,

TASCAM CC-222MKII Owner’s Manual 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents CD Recorder/Cassette Deck Important Safety Precautions Important Safety Instructions Safety Information Contents Some notes and precautions Supplied accessoriesIntroduction Beware of condensation Introduction-Some notes and precautionsRack-mounting the unit Environmental considerationsAbout CD-R and CD-RW discs Introduction-FinalizingFinalizing About tapesRecordable discs Handling of compact discsAdditional notes with regard to CD-R and CD-RW discs Use of the remote control unit Never use a stabilizer or printable discsRecommended media About this manual Introduction-About this manualFeatures and controls Phones jack and volume control Features and controls-Rear panel featuresRear panel features Monitor TAPE/MIX/DISC switchRemote control features Features and controls-Remote control featuresNumber keys 0 through 10, +10, Cassette operations Playback operationsContinuous tape/CD playback Cassette operations-Recording operations Recording operationsDubbing tapes from the CD deck Bypassing the Input level for dubbing Cassette operations-Recording tapes from the Phono deckRecording tapes from the Phono deck Dubbing to tape from the middle of a CDCassette operations-Other recording features Other recording featuresOther tape functions and features Cassette operations-Other tape functions and features Fast forward and rewindSearch keys Track search CD playerSimple playback operations Time display modesCD player-Playback modes Playback modesProgrammed order playback Intro check Setting the a and B repeat pointsCD player-Repeat play Repeat playTimer playback CD player-Auto spacingAuto spacing Input monitoring Signal volumeRecording CDs Input selectionRecording CDs-Basic recording Basic recordingFrequency conversion Dubbing from tape to disc Recording CDs-Dubbing from tape to discRecording CDs-From the Riaa Phono inputs From the Riaa Phono inputsDubbing to CD from the middle of the tape Synchronized recording Setting the trigger levelRecording CDs-Advanced recording Advanced recordingSync recording stop Sync recording startRec mute function Automatic track divisionFade-in and fade-out To perform a fade-inTo perform a fade-out Erasing tracks After recordingErasing Unfinalizing CD-RW discsAfter recording-Erasing Erasing a whole discRefreshing a disc After recording-Erasing Troubleshooting Reference and specificationsCD recorder section Reference and specifications-Menu itemsSpecifications Menu itemsReference and specifications-Specifications Phono input and headphonesCassette recorder section General specifications Reference and specifications-Dimensional drawingDimensional drawing Tape maintenanceCC-222@#
Related manuals
Manual 2 pages 55.43 Kb

CC-222MKII specifications

The Tascam CC-222MKII is a versatile and reliable combination deck that has been designed for professional audio applications. Combining the best of both worlds, this deck features a high-quality CD player and a cassette recorder, making it an ideal solution for musicians, broadcasters, and sound engineers. One of the main features of the CC-222MKII is its ability to play and record CDs as well as standard cassette tapes, which provides users with flexibility in audio formats.

The CD player in the CC-222MKII is compatible with various disc formats, including CD-R and CD-RW, allowing users to play back personalized audio compilations or recordings. Tascam has integrated a high-performance DAC (Digital to Analog Converter) within the unit, which ensures accurate sound reproduction with minimal distortion. Additionally, the player accommodates seamless playback, so users can easily transition between tracks or scan through content, enhancing the overall listening experience.

In terms of cassette functionality, the CC-222MKII offers a built-in cassette deck that utilizes a high-quality transport mechanism. This ensures smooth and reliable tape playback and recording. The deck features both playback and record capabilities for standard compact cassettes, with a user-friendly interface making it easy to navigate controls and manage audio content.

The Tascam CC-222MKII also incorporates several crucial technologies to support its functionality. One notable feature is the built-in A/D (analog to digital) and D/A (digital to analog) converters, which facilitate high-quality recording and playback. Furthermore, the unit includes a range of input options, including XLR and RCA connectors, allowing users to connect external microphones, mixers, or other audio equipment.

Another key characteristic of the CC-222MKII is its ease of use. The deck is equipped with a large LCD display that provides clear information about the current playing track, time elapsed, and other essential data. The intuitive layout and handling make it accessible for both beginners and seasoned professionals.

Moreover, the durable construction of the Tascam CC-222MKII ensures longevity and reliability in various settings, whether in a studio environment or on the road. Its compact design allows for easy integration into any audio setup, making it a popular choice for a wide range of users seeking versatility and performance in an all-in-one audio solution.
Top Page Image Contents