Tascam CC-222MKII owner manual CD player-Playback modes, Programmed order playback

Page 22

4 – CD player—Playback modes

2To play a track whose number is higher than 9, press the +10 key an appropriate number of times to set the “tens” digit of the track number, followed by a single key to set the “units” digit. For example:

Track 13 = +10, 3

Track 30 = +10, +10, +10, 0

NOTE

On the remote control unit only, the search keys can be used to “fast-forward” and “fast-rewind” through the disc.

Playback modes

The unit can be set to play back a single track, the whole disc in the order in which it was created, the tracks of the disc in a random (shuffled) order, or a programmed order.

NOTE

Selecting the playback mode is only possible using the remote control unit. It is not possible to select the play- back mode using the main unit alone.

1Press the PLAY MODE key repeatedly to cycle the display through the following:

•Continue. Normal playback mode. Program- ming is cancelled, and playback continues in the normal order.

•Single. The currently selected track is played and then playback stops. The SINGLE indicator lights in this mode.

•Random (random track order). In this mode, each track is played once before the disc repeats.

Using the track search functions will move back- wards or forwards through the random order, e.g. if track 7 is followed by track 10, it is possible to use the track search keys to go back to track 7, which is remembered as being before immediately before track 10. The red RANDOM display indicator lights in this mode. The TOTAL and TOTAL REMAIN time dis- play modes are not available here.

•Program (see “Programmed order playback” on page 22 below). The red PROGRAM display indi- cator lights in this mode.

The selected mode is shown in large characters dis- appears from the display a few seconds after select- ing the mode, and the display returns to its previous mode.

Changing to programmed play mode is not possible when playback is taking place. This change must be made while the tape is stopped.

Programmed order playback

The steps to set up to 25 program steps (tracks) to be played back in a specified order are as follows:

1Press the PLAY MODE key until the display shows Program.

2The display changes to show

0Tr 00:00 00,

meaning that no program steps have yet had tracks assigned to them.

3Use the number keys on the remote control to enter a track number (including the +10 key to enter values greater than 9, as described above). There is no need to press ENTER.

The track entered is assigned to the program step, and the display changes, showing the

track number, the total time of the program so far, and the step number, e.g.

2Tr14:56 03.

4The next program step can then be entered.

NOTE

Steps 3 and 4 above can also be carried out from the main unit by turning and pushing the MULTI DIAL.

5Repeat steps 3 and 4 above until the program is complete.

6Press the PLAY key to start playback at the first program step.

The display shows the track, the current time display, and the program step number.

While in programmed playback mode, using the SKIP keys or the MULTI DIAL moves back- wards and forwards in the order set in the pro- gram.

Use the PAUSE key to halt playback temporarily or the STOP key to stop playback of the program.

If the STOP key is used, when playback is restarted, it starts from the first program step.

22 TASCAM CC-222MKII Owner’s Manual

Page 21 Page 23
Image 22
Page 21 Page 23
Contents CD Recorder/Cassette Deck Important Safety Precautions Important Safety Instructions Safety Information Contents Supplied accessories Some notes and precautionsIntroduction Environmental considerations Introduction-Some notes and precautionsRack-mounting the unit Beware of condensationAbout tapes Introduction-FinalizingFinalizing About CD-R and CD-RW discsHandling of compact discs Recordable discsAdditional notes with regard to CD-R and CD-RW discs Never use a stabilizer or printable discs Use of the remote control unitRecommended media Introduction-About this manual About this manualFeatures and controls Monitor TAPE/MIX/DISC switch Features and controls-Rear panel featuresRear panel features Phones jack and volume controlFeatures and controls-Remote control features Remote control featuresNumber keys 0 through 10, +10, Playback operations Cassette operationsContinuous tape/CD playback Recording operations Cassette operations-Recording operationsDubbing tapes from the CD deck Dubbing to tape from the middle of a CD Cassette operations-Recording tapes from the Phono deckRecording tapes from the Phono deck Bypassing the Input level for dubbingOther recording features Cassette operations-Other recording featuresOther tape functions and features Fast forward and rewind Cassette operations-Other tape functions and featuresSearch keys Time display modes CD playerSimple playback operations Track searchPlayback modes CD player-Playback modesProgrammed order playback Repeat play Setting the a and B repeat pointsCD player-Repeat play Intro checkCD player-Auto spacing Timer playbackAuto spacing Input selection Signal volumeRecording CDs Input monitoringBasic recording Recording CDs-Basic recordingFrequency conversion Recording CDs-Dubbing from tape to disc Dubbing from tape to discFrom the Riaa Phono inputs Recording CDs-From the Riaa Phono inputsDubbing to CD from the middle of the tape Advanced recording Setting the trigger levelRecording CDs-Advanced recording Synchronized recordingSync recording start Sync recording stopAutomatic track division Rec mute functionTo perform a fade-in Fade-in and fade-outTo perform a fade-out Unfinalizing CD-RW discs After recordingErasing Erasing tracksErasing a whole disc After recording-ErasingRefreshing a disc After recording-Erasing Reference and specifications TroubleshootingMenu items Reference and specifications-Menu itemsSpecifications CD recorder sectionPhono input and headphones Reference and specifications-SpecificationsCassette recorder section Tape maintenance Reference and specifications-Dimensional drawingDimensional drawing General specificationsCC-222@#
Related manuals
Manual 2 pages 55.43 Kb

CC-222MKII specifications

The Tascam CC-222MKII is a versatile and reliable combination deck that has been designed for professional audio applications. Combining the best of both worlds, this deck features a high-quality CD player and a cassette recorder, making it an ideal solution for musicians, broadcasters, and sound engineers. One of the main features of the CC-222MKII is its ability to play and record CDs as well as standard cassette tapes, which provides users with flexibility in audio formats.

The CD player in the CC-222MKII is compatible with various disc formats, including CD-R and CD-RW, allowing users to play back personalized audio compilations or recordings. Tascam has integrated a high-performance DAC (Digital to Analog Converter) within the unit, which ensures accurate sound reproduction with minimal distortion. Additionally, the player accommodates seamless playback, so users can easily transition between tracks or scan through content, enhancing the overall listening experience.

In terms of cassette functionality, the CC-222MKII offers a built-in cassette deck that utilizes a high-quality transport mechanism. This ensures smooth and reliable tape playback and recording. The deck features both playback and record capabilities for standard compact cassettes, with a user-friendly interface making it easy to navigate controls and manage audio content.

The Tascam CC-222MKII also incorporates several crucial technologies to support its functionality. One notable feature is the built-in A/D (analog to digital) and D/A (digital to analog) converters, which facilitate high-quality recording and playback. Furthermore, the unit includes a range of input options, including XLR and RCA connectors, allowing users to connect external microphones, mixers, or other audio equipment.

Another key characteristic of the CC-222MKII is its ease of use. The deck is equipped with a large LCD display that provides clear information about the current playing track, time elapsed, and other essential data. The intuitive layout and handling make it accessible for both beginners and seasoned professionals.

Moreover, the durable construction of the Tascam CC-222MKII ensures longevity and reliability in various settings, whether in a studio environment or on the road. Its compact design allows for easy integration into any audio setup, making it a popular choice for a wide range of users seeking versatility and performance in an all-in-one audio solution.
Top Page Image Contents