Tascam CC-222MKII owner manual Introduction-Some notes and precautions, Rack-mounting the unit

Page 7

1 – Introduction—Some notes and precautions

Rack-mounting the unit

Use the rack-mounting kit to mount the unit in a stan- dard 19-inch equipment rack, as shown below. Remove the feet of the unit before mounting it.

See “Environmental considerations” on page 7 below for details of ventilation, etc.

Environmental considerations

The CC-222MKII may be used in most areas, but to maintain top performance, and prolong operating life, observe the following environmental conditions:

The nominal temperature should be between 5°C and 35°C (41°F and 95°F). The CC-222MKII is more sensitive to extremes of temperature than ordinary CD players.

Relative humidity should be 30 to 90 degrees non- condensing.

As the unit may become hot during operation, always leave sufficient space above the unit for ventilation. If you are mounting the unit in a rack, leave 1U of space above it. Allow at least 10 cm (4 in) at the rear of the unit for ventilation.

You should not place the unit on a piece of equip- ment generating heat, e.g. an amplifier, to avoid pos- sible problems with overheating.

Make sure that the unit is mounted in a level position for correct operation. Do not mount the unit in a rack tilted 5° or more from the vertical position.

NOTE

If the mounting surface is more than 5 degrees away from the horizontal, the tray will not open or close.

The voltage supplied to the unit should match the voltage as printed on the rear panel. If you are in any doubt regarding this matter, consult an electrician.

NOTE

When transporting the unit, always use the original packing materials. For this reason, we strongly recom- mend that you save all the packing materials that came with the CC-222MKII, in case you need to transport it in the future.

In addition, when transporting the unit, you should tape the disc tray closed, using an adhesive tape that will not spoil the finish of the unit.

Beware of condensation

If the unit (or a compact disc) is moved from a cold to a warm place, or used after a sudden temperature change, there is a danger of condensation; vapor in the air could condense on the internal mechanism,

making correct operation impossible. To prevent this, or if this occurs, leave the player for one or two hours with the power turned on, then turn the power off and on again.

TASCAM CC-222MKII Owner’s Manual 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents CD Recorder/Cassette Deck Important Safety Precautions Important Safety Instructions Safety Information Contents Supplied accessories Some notes and precautionsIntroduction Beware of condensation Introduction-Some notes and precautionsRack-mounting the unit Environmental considerationsAbout CD-R and CD-RW discs Introduction-FinalizingFinalizing About tapesHandling of compact discs Recordable discsAdditional notes with regard to CD-R and CD-RW discs Never use a stabilizer or printable discs Use of the remote control unitRecommended media About this manual Introduction-About this manualFeatures and controls Phones jack and volume control Features and controls-Rear panel featuresRear panel features Monitor TAPE/MIX/DISC switchRemote control features Features and controls-Remote control featuresNumber keys 0 through 10, +10, Playback operations Cassette operationsContinuous tape/CD playback Recording operations Cassette operations-Recording operationsDubbing tapes from the CD deck Bypassing the Input level for dubbing Cassette operations-Recording tapes from the Phono deckRecording tapes from the Phono deck Dubbing to tape from the middle of a CDOther recording features Cassette operations-Other recording featuresOther tape functions and features Fast forward and rewind Cassette operations-Other tape functions and featuresSearch keys Track search CD playerSimple playback operations Time display modesPlayback modes CD player-Playback modesProgrammed order playback Intro check Setting the a and B repeat pointsCD player-Repeat play Repeat playCD player-Auto spacing Timer playbackAuto spacing Input monitoring Signal volumeRecording CDs Input selectionBasic recording Recording CDs-Basic recordingFrequency conversion Dubbing from tape to disc Recording CDs-Dubbing from tape to discFrom the Riaa Phono inputs Recording CDs-From the Riaa Phono inputsDubbing to CD from the middle of the tape Synchronized recording Setting the trigger levelRecording CDs-Advanced recording Advanced recordingSync recording stop Sync recording startRec mute function Automatic track divisionTo perform a fade-in Fade-in and fade-outTo perform a fade-out Erasing tracks After recordingErasing Unfinalizing CD-RW discsErasing a whole disc After recording-ErasingRefreshing a disc After recording-Erasing Troubleshooting Reference and specificationsCD recorder section Reference and specifications-Menu itemsSpecifications Menu itemsPhono input and headphones Reference and specifications-SpecificationsCassette recorder section General specifications Reference and specifications-Dimensional drawingDimensional drawing Tape maintenanceCC-222@#
Related manuals
Manual 2 pages 55.43 Kb

CC-222MKII specifications

The Tascam CC-222MKII is a versatile and reliable combination deck that has been designed for professional audio applications. Combining the best of both worlds, this deck features a high-quality CD player and a cassette recorder, making it an ideal solution for musicians, broadcasters, and sound engineers. One of the main features of the CC-222MKII is its ability to play and record CDs as well as standard cassette tapes, which provides users with flexibility in audio formats.

The CD player in the CC-222MKII is compatible with various disc formats, including CD-R and CD-RW, allowing users to play back personalized audio compilations or recordings. Tascam has integrated a high-performance DAC (Digital to Analog Converter) within the unit, which ensures accurate sound reproduction with minimal distortion. Additionally, the player accommodates seamless playback, so users can easily transition between tracks or scan through content, enhancing the overall listening experience.

In terms of cassette functionality, the CC-222MKII offers a built-in cassette deck that utilizes a high-quality transport mechanism. This ensures smooth and reliable tape playback and recording. The deck features both playback and record capabilities for standard compact cassettes, with a user-friendly interface making it easy to navigate controls and manage audio content.

The Tascam CC-222MKII also incorporates several crucial technologies to support its functionality. One notable feature is the built-in A/D (analog to digital) and D/A (digital to analog) converters, which facilitate high-quality recording and playback. Furthermore, the unit includes a range of input options, including XLR and RCA connectors, allowing users to connect external microphones, mixers, or other audio equipment.

Another key characteristic of the CC-222MKII is its ease of use. The deck is equipped with a large LCD display that provides clear information about the current playing track, time elapsed, and other essential data. The intuitive layout and handling make it accessible for both beginners and seasoned professionals.

Moreover, the durable construction of the Tascam CC-222MKII ensures longevity and reliability in various settings, whether in a studio environment or on the road. Its compact design allows for easy integration into any audio setup, making it a popular choice for a wide range of users seeking versatility and performance in an all-in-one audio solution.
Top Page Image Contents