Chapter 2. Using Your Computer
3Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it.
4Commit your password to memory, and press the Enter key.
To remove the password, do the following:
1Select Set Supervisor Password, and press the Enter key.
2Select Enter Current Password and type in the correct password, and press the Enter key third.
Note:
Make sure the Password on boot is set to Enable if you need the password protection at power on.
To set a User Password:
1Turn on your computer. Press F2, while the initial screen is displayed. The BIOS Setup Utility screen opens.
2Select Security, using the cursor directional keys.
3Select Set User Password, and press the Enter key. The Set User Password window opens.
4Choose your user password, which can be from one to eight alphanumeric characters in any combination. Type it in the Enter New Password field.
5Press the Enter key once to move to the Confirm New Password field. Retype the password you just entered to verify it.
6Commit your password to memory, and press the Enter key.
7Press F10 to exit.
8Select OK in the Setup Confirmation window.
40