Chapter 5. Safety, Use, and Care Information
Before you install any of the following devices, touch a metal table or a grounded metal object. This action reduces any static electricity from your body. The static electricity could damage the device.
-ExpressCard
-Memory Card, such as SD Card, Memory Stick, MultiMediaCard,
-Memory module
-PCI Express Card (new card)
When transferring data to or from a Flash Media Card, such as an SD card, do not put your computer in sleep or hibernation mode before the data transfer is complete. To do so might cause damage to your data.
Cleaning the Cover of Your Computer
Occasionally clean your computer as follows:
1Prepare a mixture of a gentle
2Absorb the diluted detergent into a sponge.
3Squeeze excess liquid from the sponge.
4Wipe the cover with the sponge, using a circular motion and taking care not to let any excess liquid drip.
5Wipe the surface to remove the detergent.
6Rinse the sponge with clean running water.
7Wipe the cover with the clean sponge.
8Wipe the surface again with a dry, soft
9Wait for the surface to dry completely and remove any cloth fibers from the computer surface.
45