Sanyo WTC500AL owner manual Remote Control

Part Names and Functions

Remote Control

!2

!1

!0

qSTAND-BY button

Turn the projector off (p.25).

wWired Remote jack

Connect the remote control cable (not supplied) to this jack when using as a wired remote control.

eSignal Emission indicator

Light red while the laser beam is being emitted from the laser light window or a signal is being sent from the remote control to the projector (p.32).

rLaser Light window

A laser beam is emitted from here (p.32).

tON button

Turn the projector on (p.24).

yINPUT 1 – 3 buttons

Select an input source (INPUT 1 – INPUT 3) (pp.34– 35).

uAUTO PC button

Automatically adjusts the computer image to its optimum setting (pp.30, 38).

iFREEZE button

Freeze the picture on the screen (p.30).

oPoint ed 7 8 ( VOLUME + / – ) buttons

–Select an item or adjust the value in the On- Screen Menu (p.26).

–Pan the image in Digital zoom + mode (p.47).

–Adjust the volume level (with Point 7 8 buttons) (p.29).

!0Presentation Pointer button

Move a pointer of the projector or a pointer for wireless mouse operation (pp.32–33).

!1INFO.. button

Display the input source information (p.30).

!2L-Click button

Act as the left mouse button for wireless mouse operation (p.33).

To ensure safe operation, observe the following precautions:

–Do not bend, drop, or expose the remote control to moisture or heat.

–For cleaning, use a soft dry cloth. Do not apply benzene, thinner, spray, or any other chemical materials.