Sanyo WTC500AL PIP button, PIP VOL.. button, Shutter button, Timer button, Keystone button

PIP button

Press the PIP button on the remote control to select Picture in Picture or Picture by Picture mode. See page 52 for details.

PIP VOL.. button

Press the PIP VOL. button on the remote control at the PIP mode. The volume dialog box appears. Use the Point 7 8 buttons to adjust the volume.

SHUTTER button

See pages 28 and 58 for details.

P-TIMER button

Press the P-TIMER button on the remote control. The P-Timer display “00:00” appears on the screen and the countdown starts (00:00–59:59).

To stop the countdown, press the P-TIMER button. To cancel the P-Timer function, press the P-TIMER button again.

Remote Control

✔Note:

•See the previous page for the description of other buttons.

P-Timer display

KEYSTONE button

Press the KEYSTONE button on the remote control. The “Keystone” appears on the screen.

Use the Point ed7 8 buttons to correct keystone distortion. The keystone adjustment can be stored (p.45).

•The white arrows indicate that there is no correction.

•A red arrow indicates the direction of correction.

•An arrow disappears at the maximum correction.

•If you press the KEYSTONE button on the remote control again while the Keystone dialog box is being displayed, the keystone adjustment will be canceled.

•The adjustable range can be limited depending on the input signal.

• “Keystone” disappears after 10 seconds.

Reduce the right part with Point 8 button.