Sanyo WTC500AL owner manual When selecting Lamp1/2 mode, Lamp mode, Timer setting

Page 53

Setting

Lamp mode

This Projector is equipped with 2 Projection Lamps. This function allows you to choose how to use the lamp as follows.

Lamp1............ Always use Lamp 1.

Lamp2 ........... Always use Lamp 2.

Lamp1/2......... Automatically switch the active lamp from one

lamp to the other .

The following items can be selected. Timer setting :

. . . . . . Switch the timer to On/Off.

Start . . . . . Time to start timer. (0-24 hours)

Lamp interval . Time to lamp change. (1-24 hours)

✔Note:

•When Lamp 1 or Lamp 2 mode is switched to Lamp 1/2 mode, the active lamp changes after the total lighting time of a currently used lamp exceeds 10 hours.

•When the total lighting time of one lamp exceeds the recommended total hours of use in the Lamp 1/2 mode, the Lamp mode will be switched to Lamp 1 or Lamp 2 mode automatically. Switching operation is done when the lamp is changed.

•Lamp mode cannot be changed for a while after turning on the projector. Lamp needs some time to stabilize after the power is turned on. Stored lamp mode will be active after the lamp is stabilized.

•When the different lighting time of the lamps light alternately, you may recognize different brightness and white balance on each different lighting time of lamps.

When you change the other lamp, we recommend you always use the other lamp which is not changed.

•When theTimer is set to “Off” and the total lighting time of one lamp exceeds 10 hours of use in the Lamp 1/2 mode, one lamp will be switched to the other lamp automatically. Switching operation is done when the projector is turned Off and On.

•When the projector is switched to Off/On (including Standby),Timer setting is reset to off.

•When theTimer is set to “On” in the Lamp1/2 mode, the Lamp timer counter is displayed on the right side of the Lamp mode in the Information menu. (p.30)

Set the red frame pointer to the item and press the SELECT button.

Use the Point ed buttons to set the Lamp mode. Select from (Lamp1,Lamp2or Lamp1/2).

Select [Yes] to activate it.

When selecting Lamp1/2 mode

Timer setting

Use the Point 7 8 buttons to select items and press the SELECT buttons.

Select [Yes] to activate it.

✔Note:

•The Lamp timer counter appears with the Lamp status before 10 seconds when the Lamp will be switched.

53

Page 52 Page 54
Image 53
Page 52 Page 54
Contents Model PLC-WTC500AL Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Top Control Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Back Part Names and FunctionsFront Side Terminal 1R/C Jack 0USB Connector Series BTop Control Remote Control @2RESET/ON/ALL-OFF switch 4P-TIMER button5D..ZOOM button 6ZOOM buttonWired Remote Control Remote Control Battery InstallationRemote Control Code Adjustable Feet InstallationAttaching the lens to the projector Lens InstallationRemoving the lens DVI Connecting to a Computer Digital and Analog RGBRCA Hdmi VGA Cables used for connectionMonitor OUT and Audio OUT Specifications Connecting for Audio SignalProjector side AC outlet side Connecting the AC Power CordBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Focus Adjustment Zoom AdjustmentLens Shift Adjustment Operating with Projector ControlMenu Operation Sound AdjustmentDirect Operation Operating with Remote Control PIP button Timer buttonPIP VOL.. button Shutter buttonSpotlight Laser Pointer FunctionPointer Function Presentation Pointer button Wireless Mouse OperationRemote Control button operation Remote Control OperationInput Selection InputInput Menu Input Source SelectionRGB PC analog RGB Scart Video ComponentVideo or S-video Video System SelectionComponent AV System Menu Video or S-videoComputer System Selection Computer AdjustmentSelecting Computer System Manually PC System MenuPC Adjust Menu Auto PC AdjustmentTo store adjustment parameters Auto PC AdjManual PC Adjustment To store the adjusted data To clear the adjusted dataImage Menu Image Level SelectionImage Level Selection Image Adjust Menu Image AdjustmentImage Adjustment Gamma SharpnessNoise reduction ProgressiveTo reset the adjusted data, select Reset and press Screen Adjustment Screen AdjustmentScreen Menu KeystoneNormal Screen Size Adjustment Computer SignalsTrue FullDigital zoom For zooming in and out the imagesDigital zoom + Wide Screen Size Adjustment Video, Component SignalsZoom Setting SettingSetting Menu Language LogoLogo PIN code lock CaptureCapture Logo PIN code lockChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Background Picture in PictureTimer setting When selecting Lamp1/2 modeLamp mode Lamp life control Lamp controlPointer Power management Standby modeDisplay DisplaySlant Slant settingOn start Shutter Key lock Security Key lock and PIN code lock settingsChange the PIN code lock setting Change the PIN code lock settingPIN code lock Enter a PIN codeTest pattern Change the PIN codeChange the PIN code Factory default Factory defaultFilter Instructions Maintenance and CareReplacing the Filter Cartridge Scroll counter Filter counterLamp Mode Changeover Lamp 1/2 Replace IndicatorsAuto Lamp Selection System Lamp Status DisplayLamp Replacement Model No.. of your projector Replacement Lamp Type NoPOA-LMP125 Service Parts No 342 Then check the matters below Cleaning the Projector Cabinet Cleaning the Projection LensProblem TroubleshootingNo power AppendixDuring the operation Setting does not remain after Auto PC adjustment functionTurning off power Power management function doesWired remote control does not Remote Control doesWireless Mouse function does Indicator blinks or lightsInput Menu TreeSystem Image SystemSound PC Adjust InformationScreen Setting Projector is operating normally Indicators and Projector ConditionImmediately Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer ON-SCREEN Resolution Compatible Computer Specifications59.940 List of Picture in Picture Monitor Output at the PIP modeTechnical Specifications Optional Parts PJ Link Notice USB Connector Series B Configurations of TerminalsOutput Terminal D-sub 9 pinLogo PIN Code Lock No PIN Code Number MemoDimensions KV5AM

WTC500AL specifications

The Sanyo WTC500AL is a state-of-the-art air conditioner unit that exemplifies modern cooling technology. This exceptional product is engineered for both residential and commercial spaces, providing efficient temperature control along with a range of advanced features designed to enhance user convenience and comfort.

One of the standout features of the Sanyo WTC500AL is its energy efficiency. It operates with an impressive Energy Efficiency Ratio (EER), which translates to lower electricity bills for consumers and a reduced environmental footprint, making it an eco-friendly choice. The unit is equipped with a powerful compressor that can quickly cool large spaces, ensuring that users remain comfortable even during the sweltering summer months.

The Sanyo WTC500AL utilizes advanced inverter technology, which allows the compressor to adjust its speed according to the cooling demand. This feature not only contributes to energy savings but also ensures a more consistent and comfortable temperature throughout the room. With its quiet operation, the air conditioner maintains a peaceful environment, making it ideal for bedrooms, offices, or any quiet personal space.

Additionally, this model features a multi-stage air filtration system that helps to purify the air, removing dust, allergens, and other particles. This is particularly beneficial for individuals with allergies or respiratory issues, as it promotes cleaner and healthier indoor air quality. The filters are also easy to access and clean, making maintenance a breeze for users.

The Sanyo WTC500AL includes a range of user-friendly controls and settings, featuring a digital display panel that allows for easy temperature adjustments. It is often equipped with remote control functionality, giving users the freedom to adjust settings from anywhere in the room. The programmable timer feature allows for customized cooling schedules, ensuring that the space is cool when needed without running unnecessarily.

In terms of design, the Sanyo WTC500AL is compact and sleek, allowing it to blend seamlessly into various interior styles. Its modern aesthetics, coupled with practical functionality, make it an attractive addition to any space.

Overall, the Sanyo WTC500AL stands out as a versatile and efficient cooling solution, packed with features designed for optimal comfort, ease of use, and energy efficiency. Its blend of advanced technologies and user-friendly design makes it a top choice for anyone seeking quality air conditioning.
Top Page Image Contents