Sanyo WTC500AL owner manual Air Circulation, Top Control

Page 6

Safety Instructions

Air Circulation

Openings in the cabinet are provided for ventilation. To ensure reliable operation of the product and to protect it from overheating, these openings must not be blocked or covered.

CAUTION

Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken.

Do not put any flammable object or spray can near the projector, hot air is exhausted from the air vents.

Keep the exhaust vent at least 3’ (1 m) away from any objects.

Do not touch peripheral parts of the exhaust vent, especially screws and metallic parts. These areas will become hot while the projector is being used.

Do not put anything on the cabinet. Objects put on the cabinet will not only get damaged but also may cause fire hazard by heat.

Cooling fans are provided to cool down the projector. The fans’ running speed is changed according to the temperature inside the projector.

Air flow

Air Intake Vent

Exhaust Vent (Hot air exhaust)

IMPORTANT!

Filter Maintenance!!

The projector uses a lamp which generates significant heat. The cooling fans and air vents are provided to dissipate the heat by drawing air into the housing and the filter is located in the intake vents to prevent dust from getting inside of the projector.

In order to care for the projector appropriately, regular cleaning is required. Remove any dirt or dust that has accumulated on the projector.

If the projector reaches a time set in the timer setting, a Filter replacement icon (Fig. 1) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below), indicating that the filter replacement is necessary.

If the projector detects that the filter is clogged and no scroll is left in the filter cartridge, a Filter cartridge replacement icon (Fig. 2) appears on the screen and WARNING FILTER indicator on the top panel lights up (see below). Stop using the projector immediately and replace the filter cartridge.

Blocking the air vents and leaving the projector uncleaned for a long time may not only damage the projector and may require costly repairs but may also cause accidents or fire.

For maintenance of the filter, refer to “Filter counter” on page 59 and “Maintenance and Care” on pages 60–61.

Damages to the projector caused by using an uncleaned filter or improper maintenance will void the warranty on the projector..

Top Control

WARNING FILTER

 

indicator

Fig..1 Filter replacement icon

Fig..2 Filter cartridge replacement icon

6

Image 6
Contents Model PLC-WTC500AL Features and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorAC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Part Names and Functions FrontBack Side Terminal 0USB Connector Series B 1R/C JackTop Control Remote Control 5D..ZOOM button 4P-TIMER button@2RESET/ON/ALL-OFF switch 6ZOOM buttonRemote Control Battery Installation Wired Remote ControlRemote Control Code Installation Adjustable FeetLens Installation Removing the lensAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB DVICables used for connection RCA Hdmi VGAConnecting for Audio Signal Monitor OUT and Audio OUT SpecificationsConnecting the AC Power Cord Projector side AC outlet sideTurning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector How to Operate the On-Screen Menu Remote ControlOn-Screen Menu Menu Bar Lens Shift Adjustment Zoom AdjustmentFocus Adjustment Operating with Projector ControlSound Adjustment Direct OperationMenu Operation Operating with Remote Control PIP VOL.. button Timer buttonPIP button Shutter buttonLaser Pointer Function Pointer FunctionSpotlight Wireless Mouse Operation Presentation Pointer buttonInput Selection Remote Control OperationRemote Control button operation InputRGB PC analog RGB Scart Input Source SelectionInput Menu Video ComponentComponent Video System SelectionVideo or S-video AV System Menu Video or S-videoSelecting Computer System Manually Computer AdjustmentComputer System Selection PC System MenuTo store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataImage Level Selection Image Level SelectionImage Menu Image Adjustment Image AdjustmentImage Adjust Menu Noise reduction SharpnessGamma ProgressiveTo reset the adjusted data, select Reset and press Screen Menu Screen AdjustmentScreen Adjustment KeystoneTrue Screen Size Adjustment Computer SignalsNormal FullFor zooming in and out the images Digital zoom +Digital zoom Screen Size Adjustment Video, Component Signals ZoomWide Setting Menu Language SettingSetting LogoCapture CaptureLogo PIN code lock Logo PIN code lockChange the Logo PIN code lock setting Enter a Logo PIN codeChange the Logo PIN code Picture in Picture BackgroundWhen selecting Lamp1/2 mode Lamp modeTimer setting Lamp control Lamp life controlPointer Display Standby modePower management DisplaySlant setting On startSlant Shutter Security Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code lock settingChange the PIN code lock setting Enter a PIN codeChange the PIN code Change the PIN codeTest pattern Factory default Factory defaultMaintenance and Care Filter InstructionsReplacing the Filter Cartridge Filter counter Scroll counterAuto Lamp Selection System Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp Status DisplayLamp Replacement Replacement Lamp Type No POA-LMP125 Service Parts No 342Model No.. of your projector Then check the matters below Cleaning the Projection Lens Cleaning the Projector CabinetNo power TroubleshootingProblem AppendixTurning off power Auto PC adjustment functionDuring the operation Setting does not remain after Power management function doesWireless Mouse function does Remote Control doesWired remote control does not Indicator blinks or lightsSystem Menu TreeInput Image SystemPC Adjust Information ScreenSound Setting Indicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition ImmediatelyIf the Filter counter reached a time set in the timer Compatible Computer Specifications ON-SCREEN Resolution59.940 Monitor Output at the PIP mode List of Picture in PictureTechnical Specifications Optional Parts PJ Link Notice Output Configurations of TerminalsUSB Connector Series B Terminal D-sub 9 pinPIN Code Number Memo Logo PIN Code Lock NoDimensions KV5AM

WTC500AL specifications

The Sanyo WTC500AL is a state-of-the-art air conditioner unit that exemplifies modern cooling technology. This exceptional product is engineered for both residential and commercial spaces, providing efficient temperature control along with a range of advanced features designed to enhance user convenience and comfort.

One of the standout features of the Sanyo WTC500AL is its energy efficiency. It operates with an impressive Energy Efficiency Ratio (EER), which translates to lower electricity bills for consumers and a reduced environmental footprint, making it an eco-friendly choice. The unit is equipped with a powerful compressor that can quickly cool large spaces, ensuring that users remain comfortable even during the sweltering summer months.

The Sanyo WTC500AL utilizes advanced inverter technology, which allows the compressor to adjust its speed according to the cooling demand. This feature not only contributes to energy savings but also ensures a more consistent and comfortable temperature throughout the room. With its quiet operation, the air conditioner maintains a peaceful environment, making it ideal for bedrooms, offices, or any quiet personal space.

Additionally, this model features a multi-stage air filtration system that helps to purify the air, removing dust, allergens, and other particles. This is particularly beneficial for individuals with allergies or respiratory issues, as it promotes cleaner and healthier indoor air quality. The filters are also easy to access and clean, making maintenance a breeze for users.

The Sanyo WTC500AL includes a range of user-friendly controls and settings, featuring a digital display panel that allows for easy temperature adjustments. It is often equipped with remote control functionality, giving users the freedom to adjust settings from anywhere in the room. The programmable timer feature allows for customized cooling schedules, ensuring that the space is cool when needed without running unnecessarily.

In terms of design, the Sanyo WTC500AL is compact and sleek, allowing it to blend seamlessly into various interior styles. Its modern aesthetics, coupled with practical functionality, make it an attractive addition to any space.

Overall, the Sanyo WTC500AL stands out as a versatile and efficient cooling solution, packed with features designed for optimal comfort, ease of use, and energy efficiency. Its blend of advanced technologies and user-friendly design makes it a top choice for anyone seeking quality air conditioning.