Sanyo WTC500AL owner manual Shutter

Page 58

Setting

Shutter

Shutter function is available to block out light to the screen, so that the screen can be used for the other presenters.

Protection

Prohibits the shutter operation from the remote control and the projector's top control.

Remote control...Selecting "On" prohibits the shutter operation from the remote control.

Projector . . . . . ...Selecting "On" prohibits the shutter operation from the top control.

It is possible to prohibit the shutter operation from both of the remote control and the top control.

Management

The Shutter Management function turns off the projection lamp when the projector is left with the shutter closed and the set time has passed away. The count-down time can be set between 5 and 180 minutes. When the count-down time has elapsed, the shutter will be opened up automatically and the lamp will be turned off to cool itself down. The SHUTTER indicator is blinking blue during this cooling-off period. When the lamp has been fully cooled down, the READY indicator turns green lighting and the SHUTTER indicator keeps blinking. Should the ON / STAND-BY button be pressed in this condition, the projection lamp will be turned on and the SHUTTER indicator turns off.

HDMI setup

Set Image and Sound according to the output signal of video equipment. Press the Point 7 8 buttons to switch between each option.

Image . . Normal :

When the output of video equipment is

 

set to “Normal.”

Enhanced : When the output of video equipment is

 

set to “ENHANCED.”

Sound . HDMI :

Select when use PCM AUDIO (DIGITAL

 

AUDIO)

AUDIO1:

Select when use AUDIO1 input

The names for the output setting of video equipment vary from equipment to equipment. For details, refer to the owner’s manual of video equipment.

When the black part of the image are destroyed or stand out, please switch to "Normal" or "Enhanced" according to the output

signal of video equipment.

✔Note:

•The Factory default value is set to 180 minutes for the count down time.

•The Shutter Management function cannot be halted.

HDMI setup

Press the Point 7 8 buttons to select Normal or Enhanced according to the output signal of video equipment and HDMI or Audio1 according to the input sound.

✔Note:

•HDMI setup is not grayout and inoperative other than HDMI input selection mode.

58

Page 57 Page 59
Image 58
Page 57 Page 59
Contents Model PLC-WTC500AL Features and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorAC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Front Part Names and FunctionsBack Side Terminal 0USB Connector Series B 1R/C JackTop Control Remote Control 5D..ZOOM button 4P-TIMER button@2RESET/ON/ALL-OFF switch 6ZOOM buttonRemote Control Battery Installation Wired Remote ControlRemote Control Code Installation Adjustable FeetRemoving the lens Lens InstallationAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB DVICables used for connection RCA Hdmi VGAConnecting for Audio Signal Monitor OUT and Audio OUT SpecificationsConnecting the AC Power Cord Projector side AC outlet sideTurning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector Remote Control How to Operate the On-Screen MenuOn-Screen Menu Menu Bar Lens Shift Adjustment Zoom AdjustmentFocus Adjustment Operating with Projector ControlDirect Operation Sound AdjustmentMenu Operation Operating with Remote Control PIP VOL.. button Timer buttonPIP button Shutter buttonPointer Function Laser Pointer FunctionSpotlight Wireless Mouse Operation Presentation Pointer buttonInput Selection Remote Control OperationRemote Control button operation InputRGB PC analog RGB Scart Input Source SelectionInput Menu Video ComponentComponent Video System SelectionVideo or S-video AV System Menu Video or S-videoSelecting Computer System Manually Computer AdjustmentComputer System Selection PC System MenuTo store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataImage Level Selection Image Level SelectionImage Menu Image Adjustment Image AdjustmentImage Adjust Menu Noise reduction SharpnessGamma ProgressiveTo reset the adjusted data, select Reset and press Screen Menu Screen AdjustmentScreen Adjustment KeystoneTrue Screen Size Adjustment Computer SignalsNormal FullDigital zoom + For zooming in and out the imagesDigital zoom Zoom Screen Size Adjustment Video, Component SignalsWide Setting Menu Language SettingSetting LogoCapture CaptureLogo PIN code lock Logo PIN code lockEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Picture in Picture BackgroundLamp mode When selecting Lamp1/2 modeTimer setting Lamp control Lamp life controlPointer Display Standby modePower management DisplayOn start Slant settingSlant Shutter Security Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code lock settingChange the PIN code lock setting Enter a PIN codeChange the PIN code Change the PIN codeTest pattern Factory default Factory defaultMaintenance and Care Filter InstructionsReplacing the Filter Cartridge Filter counter Scroll counterAuto Lamp Selection System Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp Status DisplayLamp Replacement POA-LMP125 Service Parts No 342 Replacement Lamp Type NoModel No.. of your projector Then check the matters below Cleaning the Projection Lens Cleaning the Projector CabinetNo power TroubleshootingProblem AppendixTurning off power Auto PC adjustment functionDuring the operation Setting does not remain after Power management function doesWireless Mouse function does Remote Control doesWired remote control does not Indicator blinks or lightsSystem Menu TreeInput Image SystemScreen PC Adjust InformationSound Setting Indicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition ImmediatelyIf the Filter counter reached a time set in the timer Compatible Computer Specifications ON-SCREEN Resolution59.940 Monitor Output at the PIP mode List of Picture in PictureTechnical Specifications Optional Parts PJ Link Notice Output Configurations of TerminalsUSB Connector Series B Terminal D-sub 9 pinPIN Code Number Memo Logo PIN Code Lock NoDimensions KV5AM

WTC500AL specifications

The Sanyo WTC500AL is a state-of-the-art air conditioner unit that exemplifies modern cooling technology. This exceptional product is engineered for both residential and commercial spaces, providing efficient temperature control along with a range of advanced features designed to enhance user convenience and comfort.

One of the standout features of the Sanyo WTC500AL is its energy efficiency. It operates with an impressive Energy Efficiency Ratio (EER), which translates to lower electricity bills for consumers and a reduced environmental footprint, making it an eco-friendly choice. The unit is equipped with a powerful compressor that can quickly cool large spaces, ensuring that users remain comfortable even during the sweltering summer months.

The Sanyo WTC500AL utilizes advanced inverter technology, which allows the compressor to adjust its speed according to the cooling demand. This feature not only contributes to energy savings but also ensures a more consistent and comfortable temperature throughout the room. With its quiet operation, the air conditioner maintains a peaceful environment, making it ideal for bedrooms, offices, or any quiet personal space.

Additionally, this model features a multi-stage air filtration system that helps to purify the air, removing dust, allergens, and other particles. This is particularly beneficial for individuals with allergies or respiratory issues, as it promotes cleaner and healthier indoor air quality. The filters are also easy to access and clean, making maintenance a breeze for users.

The Sanyo WTC500AL includes a range of user-friendly controls and settings, featuring a digital display panel that allows for easy temperature adjustments. It is often equipped with remote control functionality, giving users the freedom to adjust settings from anywhere in the room. The programmable timer feature allows for customized cooling schedules, ensuring that the space is cool when needed without running unnecessarily.

In terms of design, the Sanyo WTC500AL is compact and sleek, allowing it to blend seamlessly into various interior styles. Its modern aesthetics, coupled with practical functionality, make it an attractive addition to any space.

Overall, the Sanyo WTC500AL stands out as a versatile and efficient cooling solution, packed with features designed for optimal comfort, ease of use, and energy efficiency. Its blend of advanced technologies and user-friendly design makes it a top choice for anyone seeking quality air conditioning.
Top Page Image Contents