Basic Operation
Turning Off the Projector
1 | Press the |
|
|
|
|
|
|
|
| ||
| or the |
|
|
|
|
| “Power off?” appears on the screen. |
|
|
|
|
2 | Press the |
|
|
|
|
|
|
|
| ||
|
|
|
| ||
| button on the remote control again to turn off the |
|
|
|
|
| projector. The POWER indicator starts to blink red after |
|
|
|
|
| 3 seconds. After the projector is turned off, the cooling |
|
|
|
|
| “Power off?” disappears after 4 seconds. | ||||
| fans operates for 90 seconds. At this period of time you | ||||
| can unplug the AC power cord even if the fans are still |
|
|
|
|
| running. During the POWER indicator is blinking, you |
|
|
|
|
| cannot turn on the projector. |
|
|
|
|
3 | When the projector has cooled down enough, the |
|
|
|
|
| POWER indicator stops blinking and you can turn |
|
|
|
|
on the projector. After it is cooled down completely, unplug the AC power cord.
TO MAINTAIN LIFE OF THE LAMP, ONCE YOU
TURN THE PROJECTOR ON, WAIT AT LEAST FIVE
MINUTES BEFORE TURNING IT OFF.
DO NOT UNPLUG THE AC POWER CORD WHILE
THE COOLING FANS ARE RUNNING OR BEFORE
THE POWER INDICATOR STOPS BLINKING.
OTHERWISE IT WILL RESULT IN SHORTENING
THE LAMP LIFE.
DO NOT OPERATE THE PROJECTOR
CONTINUOUSLY WITHOUT REST. CONTINUOUS
USE MAY RESULT IN SHORTENING THE LAMP
LIFE. TURN OFF THE PROJECTOR AND LET
STAND FOR ABOUT AN HOUR IN EVERY 24
HOURS.
✔Notes:
•When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.57).
•The running speed of cooling fans is changed according to the temperature inside the projector.
•Do not put the projector in a case before the projector is cooled enough.
•If the WARNINGTEMP. indicator blinks or emits red light, see “Warning Indicators” on page 69.
•While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.
•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.
•The projector can be turned on after the POWER indicator turns red.The waiting time to restart will be shortened when the normal
25