Sanyo WTC500L owner manual Screen Size Adjustment Computer Signals, Normal, True, Full, Custom

Screen Adjustment

Screen Size Adjustment (Computer Signals)

Select the desired screen size that conforms to the input signal source.

Normal

Provide the image to fit the screen size.

True

Provide the image in its original size. When the original image size is larger than the screen size (1024 x 768), the projector enters to the panning mode automatically. Use the Point ed7 8 buttons to pan the image. When adjusted, the arrows will turn red. When reached to the correction limits, the arrows will disappear.

Full

Provide the full screen image.

Custom

Adjust the screen scale and position manually with this function.

Press the SELECT button at Custom and the “Custom” is displayed on the screen for a few seconds and then the Aspect dialog box appears.

Scale H/V	Adjust the Horizontal/Vertical screen scale.
H&V	When set to “On,” the aspect ratio is
	fixed. The “Scale V” appears dimmed and
	becomes unavailable. Adjust “Scale H,”
	then the screen scale is automatically
	modified based on the aspect ratio.
Position H/V	Adjust the Horizontal/Vertical screen
	position.
Common	Save the adjusted scale to all the inputs.
	Press the SELECT button at Common to
	display a confirmation box. To save the
	scale, press the SELECT button at “Yes.”
	When Custom is selected, the saved scale
	is used.
Reset	Reset the all adjusted values. Press
	the SELECT button at Reset to display
	a confirmation box. To reset, press the
	SELECT button at “Yes.”

Screen Menu

Screen Menu icon

Move the red frame pointer to the desired function and press the SELECT button.

Press the SELECT button at Common or Reset, to display a confirmation box.

✔Notes:

•When no signal is detected, “Normal” is set automatically and the Aspect dialog box disappears.

•The adjustable range for Scale H/V and Position H/V is limited depending on the input signal.

46