Sanyo WTC500L owner manual Screen Adjustment, Screen Menu, Keystone

Screen Adjustment

Screen Adjustment

1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the Screen Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to the desired function and then press the

SELECT button.

Keystone

This function is used to store or reset the keystone correction when the AC power cord is unplugged. Use the Point 7 8 buttons to switch between each option.

Store........ Keep the keystone correction even when the

AC power cord is unplugged.

Reset ....... Release the keystone correction when the AC

power cord is unplugged.

To correct keystone distortion, press the SELECT button. The “Keystone” appears on the screen. Use the Point ed 7 8 buttons to correct keystone distortion. (p.31)

Screen Menu

Screen Menu icon

Move the red frame pointer to the desired function and press the SELECT button.

Keystone

Use the Point 7 8 buttons to select Store or Reset.

Ceiling

When this function is set to “On,” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling-mounted projector.

Rear

When this function is set to “On,” the picture is left/right reversed. This function is used to project the image from the rear of the screen.

Ceiling

Rear

45