Sanyo WTC500L owner manual Auto PC Adjustment, PC Adjust Menu, To store adjustment parameters

Page 38

Computer Adjustment

Auto PC Adjustment

Auto PC Adjustment function is provided to automatically adjust Fine sync, Total dots, Horizontal and Vertical positions to conform to your computer.

Direct Operation

Remote Control

The Auto PC adjustment function can be operated directly by pressing the AUTO PC button on the remote control.

AUTO PC button

Menu Operation

	Auto PC Adj..
1	Press the MENU button to display the On-Screen
	Menu. Use the Point 7 8 buttons to move the red
	frame pointer to the PC Adjust Menu icon.
2	Use the Point ed buttons to move the red frame
	pointer to Auto PC Adj. and then press the SELECT

button twice.

To store adjustment parameters

The adjusted parameters from the Auto PC Adjustment can be stored in the projector. Once the parameters are stored, the setting can be done just by selecting a Mode (1–10) in the PC System Menu (see page 37). See also “Store” on page 40.

✔Notes:

•Fine sync,Total dots, Horizontal and Vertical position of some computers cannot be fully adjusted with the Auto PC Adjustment function. When the image is not provided properly with this operation, manual adjustments are required (pp.39–40).

•The Auto PC Adjustment cannot be operated when 480i, 575i, 480p, 575p, 720p,1035i, or 1080i is selected in the PC System Menu (p.37), or when the signal is coming from the DVI-terminal.

PC Adjust Menu

PC Adjust Menu icon

Move the red frame pointer to Auto PC Adj. and press the SELECT button.

“Please wait...” appears while the Auto PC adjustment is in process.

38

Image 38

Contents Model PLC-WTC500L Features and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Air Circulation Top ControlInstalling the Projector in Proper Directions Positioning PrecautionsMoving the Projector Transporting the ProjectorCompliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Back Part Names and FunctionsFront Side Terminal 0USB Connector Series B 1R/C JackTop Control Remote Control 5D..ZOOM button 4P-TIMER button@2RESET/ON/ALL-OFF switch 6ZOOM buttonRemote Control Battery Installation Wired Remote ControlRemote Control Code Installation Adjustable FeetAttaching the lens to the projector Lens InstallationRemoving the lens Connecting to a Computer Digital and Analog RGB DVICables used for connection RCA Hdmi VGAConnecting for Audio Signal Monitor OUT and Audio OUT SpecificationsConnecting the AC Power Cord Projector side AC outlet sideTurning On the Projector What is PIN code?Basic Operation Enter a PIN codeTurning Off the Projector On-Screen Menu How to Operate the On-Screen MenuRemote Control Menu Bar Lens Shift Adjustment Zoom AdjustmentFocus Adjustment Operating with Projector ControlMenu Operation Sound AdjustmentDirect Operation Operating with Remote Control PIP VOL.. button Timer buttonPIP button Shutter buttonSpotlight Laser Pointer FunctionPointer Function Wireless Mouse Operation Presentation Pointer buttonInput Selection Remote Control OperationRemote Control button operation InputRGB PC analog RGB Scart Input Source SelectionInput Menu Video ComponentComponent Video System SelectionVideo or S-video AV System Menu Video or S-videoSelecting Computer System Manually Computer AdjustmentComputer System Selection PC System MenuTo store adjustment parameters Auto PC AdjustmentPC Adjust Menu Auto PC AdjManual PC Adjustment To clear the adjusted data To store the adjusted dataImage Menu Image Level SelectionImage Level Selection Image Adjust Menu Image AdjustmentImage Adjustment Noise reduction SharpnessGamma ProgressiveTo reset the adjusted data, select Reset and press Screen Menu Screen AdjustmentScreen Adjustment KeystoneTrue Screen Size Adjustment Computer SignalsNormal FullDigital zoom For zooming in and out the imagesDigital zoom + Wide Screen Size Adjustment Video, Component SignalsZoom Setting Menu Language SettingSetting LogoCapture CaptureLogo PIN code lock Logo PIN code lockChange the Logo PIN code Change the Logo PIN code lock settingEnter a Logo PIN code Picture in Picture BackgroundTimer setting When selecting Lamp1/2 modeLamp mode Lamp control Lamp life controlPointer Display Standby modePower management DisplaySlant Slant settingOn start Shutter Security Key lock and PIN code lock settings Key lockPIN code lock Change the PIN code lock settingChange the PIN code lock setting Enter a PIN codeTest pattern Change the PIN codeChange the PIN code Factory default Factory defaultMaintenance and Care Filter InstructionsReplacing the Filter Cartridge Filter counter Scroll counterAuto Lamp Selection System Lamp 1/2 Replace IndicatorsLamp Mode Changeover Lamp Status DisplayLamp Replacement Model No.. of your projector Replacement Lamp Type NoPOA-LMP125 Service Parts No 342 Then check the matters below Cleaning the Projection Lens Cleaning the Projector CabinetNo power TroubleshootingProblem AppendixTurning off power Auto PC adjustment functionDuring the operation Setting does not remain after Power management function doesWireless Mouse function does Remote Control doesWired remote control does not Indicator blinks or lightsSystem Menu TreeInput Image SystemSound PC Adjust InformationScreen Setting Indicators and Projector Condition Projector is operating normallyProjector is detecting abnormal condition ImmediatelyIf the Filter counter reached a time set in the timer Compatible Computer Specifications ON-SCREEN Resolution59.940 Monitor Output at the PIP mode List of Picture in PictureTechnical Specifications Optional Parts PJ Link Notice Output Configurations of TerminalsUSB Connector Series B Terminal D-sub 9 pinPIN Code Number Memo Logo PIN Code Lock NoDimensions KV5AL