Sanyo PLC-XU355A Basic Operation, Turning On the Projector, Video / PC selection window

Page 20

Basic Operation

Turning On the Projector

1

Complete peripheral connections (with a computer,

VCR, etc.) before turning on the projector.

2

Connect the projector’s AC power cord into an AC

outlet. The POWER indicator lights red. Open the lens

 

cap (see pages 8, 63).

3

Press the ON/SYAND-BY button on the top control or

on the remote control. The POWER indicator lights

 

green and the cooling fans start to operate. The

 

preparation display appears on the screen and the

4

countdown starts.

After the countdown, the input source that was selected

the last time and the lamp control status icon (see page

 

55) appear on the screen.

5

If there is no signal input when start on the projector,

or the current signal is missed while operating the

projector, the Video/PC selection window will be displayed on the screen, please move the pointer to input source desired by pressing the Point ▲▼ buttons and press the SELECT button. And then follow the input signal guidance window to correct the signal and connection.

If the projector is locked with a PIN code, PIN code input dialog box will appear. Enter the PIN code as instructed on the next page.

16

The preparation display will disappear after 30 seconds.

Selected Input Source and Lamp Control

Video

Lamp control status

(See page 55 for Lamp control status.)

Note:

The Filter warning and Lamp replacement icons may appear on the screen depending on the usage state of the projector.

Video / PC selection window

Cancel

Note:

When the Logo select function is set to Off, the logo will not be shown on the screen (p.49).

When Countdown off or Off is selected in the Display function, the countdown will not be shown on the screen (p.48).

When the Input Search function is set to On2, the input signal will be searched automatically (p.47).

When Off is selected in the Display function, the Video/ PC selection window and the input signal guidance window are not shown on the screen. (p.48)

Input signal guidance window

No signal

Current Input setting:Video

Is signal processed correctly?

Is cable connected properly?

Video / PC selection window

Cancel

Input signal guidance window

No signal

Current Input setting:RGB

Is signal processed correctly?

Is cable connected properly?

20

Image 20
Contents Network Supported Memory ViewerFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Moving the Projector Safety Instructions Air CirculationInstalling the Projector in Proper Position Compliance AC Power Cord for the United States and CanadaAC Power Cord for the United Kingdom Part Names and Functions FrontBack BottomPart Names and Functions ⑤ LAN Connection Terminal ⑥ USB Connector Series a⑫ USB Connector Series B ② Point Volume +/- buttons ⑤ Power indicator⑦ Auto SETUP/CANCEL button ⑧ Warning indicatorRemote Control ③ Signal Emission indicatorPart Names and Functions Laser Pointer Function Pointer FunctionSpotlight PointerPart Names and Functions Wireless Mouse Operation Remote Control CodeRemote Control Operating Range Adjustable FeetInstallation Positioning the ProjectorInstallation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Installation Connecting the AC Power Cord NoteInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlInstallation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector How to Operate the On-Screen Menu Remote ControlBasic Operation Top ControlBasic Operation Menu Bar RGBKeystone Correction Zoom and Focus AdjustmentAuto Setup Function Basic Operation Sound Adjustment VolumeVolume Dialog Box MuteBasic Operation Remote Control Operation Timer button No SHOw buttonImage button Screen buttonInput Menu Computer InputInput Source Selection RGB Computer 1/Computer Analog Input Menu Computer Input Computer System Selection PC System MenuComputer Input Auto PC Adjustment PC adjust MenuTo store adjustment parameters Auto PC adjComputer Input Manual PC Adjustment Reset Mode freeComputer Input StoreImage Mode Selection Image select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuCustom Scale H/VPosition H/V For zooming in and out the images Digital zoom +Video Video InputInput Source Selection Video, S-video Component RGB Scart Video Input Video System Selection AV System Menu Video or S-VideoVideo or S-Video Component AV System Menu ComponentVideo Input Image Mode Selection CinemaVideo Input Image Adjustment ColorTint Blackboard or ColorboardOff Disabled Lower reduction Higher reduction Progressive Video InputNoise reduction Store Store MenuVideo Input Screen Size Adjustment Setting SettingSetting Menu Language LanguageAuto setup Auto setupInput search Auto KeystonePower off? p.22 KeystoneBackground UserLogo Logo and Logo PIN code lock settings Logo select Logo select , capture and Logo PIN code changeLogo PIN code lock Capture Logo PIN code lockCapture Logo PIN code change Change the Logo PIN code lock settingEnter a Logo PIN code Large , Middle or Small , Arrow , Finger or Dot and press CeilingRear Power management Closed caption Standby modeOn start Lamp life control Remote control Key lock Security Key lock and PIN code lockKey lock PIN code lockChange the PIN code lock setting Enter a PIN code Change the PIN codeEnter a PIN code PIN code changeFilter counter FanFan control Filter counterLogo , PIN code lock , Logo PIN code lock , Lamp counter Factory defaultFilter counter to the factory default settings Information Input Source Information DisplayMaintenance and Cleaning Indicator lights redProjector is shut down and the Warning Note Then check the matters belowMaintenance and Cleaning Cleaning the Filters Resetting the Filter CounterCleaning the Projector Cabinet Maintenance and Cleaning Attaching the Lens CapCleaning the Projection Lens Maintenance and Cleaning Lamp Replacement Maintenance and Cleaning Service Parts No 343Troubleshooting AppendixAppendix Remote Control does not work Indicator blinks or lightsWireless Mouse function does not work Image is distorted or runs offAppendix Appendix Menu Tree Computer InputVideo Input Appendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionSpecifications are subject to change without notice Panel Resolution Signal CompatibilityPower Mechanical InformationOptional Parts Appendix PJ Link Notice Appendix Configurations of Terminals USB Connector Series BAppendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No USB Thumb Drive CaseAppendix Dimensions Unit mminchKG5AE