Video Input
Sharpness
Press the Point ◄ button to decrease the sharpness of the image; press the Point ► button to increase the sharpness of the image (from 0 to 15).
Gamma
Use the Point ◄► buttons to adjust the gamma value to obtain a better balance of contrast (from 0 to 15).
Noise reduction
Noise interference on the screen can be reduced. Select one of the following options to get smoother images.
Off | Disabled. |
L1 | Lower reduction |
L2 | Higher reduction |
Progressive
An interlaced video signal can be displayed in progressive mode. Select one of the following options.
Off | Disabled. |
L1 | For an active picture. |
L2 | For a still picture. |
Film | For watching a film. With this function, the |
| projector reproduces pictures faithful to the |
| original film quality. |
Reset
To reset the adjusted data, select Reset and press Point ► button. A confirmation box appears and then select Yes. All adjustments will return to their previous figures.
Store | Store Menu |
| |
To store the adjusted data, select Store and press Point ► |
|
or the SELECT button. Use the Point ▲▼ buttons to select |
|
one from Image 1 to 4 and press the SELECT button. |
|
A confirmation box appears and then select Yes. Stored |
|
data can be called up by selecting an Image |
|
Image Mode Selection on page 42. |
|
Note:
Noise reduction and Progressive cannot be selected when 480p, 575p, 720p, 1035i or 1080i is selected (p.41).
A confirmation box appears and then select Yes.
44