Sanyo PLC-XU305A, PLC-XU355A owner manual Computer Input Computer System Selection, PC System Menu

Page 31

Computer Input

Computer System Selection

This projector automatically tunes to various types of computers with its Multi-scan system and Auto PC Adjustment. If a computer is selected as a signal source, this projector automatically detects the signal format and tunes to project a proper image without any additional settings. (Signal formats provided in this projector are shown on pages 73-74)

One of the following messages may appear when:

Auto

-----

Mode 1

The projector cannot recognize the connected signal conforming to the provided PC Systems. Auto is displayed on the System Menu box and the Auto PC Adjustment function works to display proper images. If the image is not projected properly, a manual adjustment is required (pp.33-34).

There is no signal input from the computer. Check the connection between your computer and the projector. (See “Troubleshooting” on page 66.)

The preset system is manually adjusted in the PC adjust Menu. The adjusted data can be stored in Mode 1-5(pp.33-34).

PC System Menu

The PC System Menu Selected system is displayed.

SVGA 1

PC Systems provided in this projector is chosen. The projector chooses a proper system provided in the projector and displays it.

*Mode 1 and SVGA 1 are examples.

Selecting Computer System Manually

PC system can also be selected manually.

1

Press the MENU button to display the On-Screen

 

Menu. Use the Point ▲▼ buttons to select Input and

 

then press the Point or SELECT button.

2

Use the Point ▲▼ buttons to select System and then

 

press the Point or SELECT button.

3

Use the Point ▲▼ buttons to select the desired system

 

and then press the SELECT button.

PC System Menu

Systems in this

Customized Mode

dialog box

(1–5)set in the

can be selected.

PC adjust Menu

 

(pp.33-34).

31

Image 31
Contents Memory Viewer Network SupportedFeatures and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Installing the Projector in Proper Position Safety Instructions Air CirculationMoving the Projector AC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Bottom Part Names and FunctionsFront Back⑫ USB Connector Series B ⑤ LAN Connection Terminal ⑥ USB Connector Series aPart Names and Functions ⑧ Warning indicator ② Point Volume +/- buttons⑤ Power indicator ⑦ Auto SETUP/CANCEL button③ Signal Emission indicator Remote ControlPointer Part Names and Functions Laser Pointer FunctionPointer Function SpotlightRemote Control Code Part Names and Functions Wireless Mouse OperationAdjustable Feet Remote Control Operating RangePositioning the Projector InstallationCables used for connection Installation Connecting to a ComputerInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Note Installation Connecting the AC Power CordSelected Input Source and Lamp Control Input signal guidance windowBasic Operation Turning On the ProjectorPIN Code Input Dialog Box InstallationBasic Operation Turning Off the Projector Top Control How to Operate the On-Screen MenuRemote Control Basic OperationRGB Basic Operation Menu BarAuto Setup Function Zoom and Focus AdjustmentKeystone Correction Mute Basic Operation Sound AdjustmentVolume Volume Dialog BoxBasic Operation Remote Control Operation Screen button Timer buttonNo SHOw button Image buttonInput Source Selection RGB Computer 1/Computer Analog Computer InputInput Menu Input Menu PC System Menu Computer Input Computer System SelectionAuto PC adj Computer Input Auto PC AdjustmentPC adjust Menu To store adjustment parametersComputer Input Manual PC Adjustment Store ResetMode free Computer InputImage select Menu Image Mode SelectionImage Adjust Menu Computer Input Image AdjustmentScreen Menu Screen Size AdjustmentFor zooming in and out the images Digital zoom + CustomScale H/V Position H/VInput Source Selection Video, S-video Video InputVideo Component RGB Scart Component AV System Menu Component Video Input Video System SelectionAV System Menu Video or S-Video Video or S-VideoCinema Video Input Image Mode SelectionBlackboard or Colorboard Video Input Image AdjustmentColor TintStore Store Menu Off Disabled Lower reduction Higher reduction ProgressiveVideo Input Noise reductionVideo Input Screen Size Adjustment Language SettingSetting Setting Menu LanguageAuto Keystone Auto setupAuto setup Input searchUser Power off? p.22Keystone BackgroundLogo select , capture and Logo PIN code change Logo Logo and Logo PIN code lock settings Logo selectCapture Capture Logo PIN code lockLogo PIN code lock Enter a Logo PIN code Change the Logo PIN code lock settingLogo PIN code change Rear CeilingLarge , Middle or Small , Arrow , Finger or Dot and press Power management On start Standby modeClosed caption Lamp life control Remote control PIN code lock Key lockSecurity Key lock and PIN code lock Key lockPIN code change Change the PIN code lock settingEnter a PIN code Change the PIN code Enter a PIN codeFilter counter Filter counterFan Fan controlFilter counter to the factory default settings Factory defaultLogo , PIN code lock , Logo PIN code lock , Lamp counter Input Source Information Display InformationNote Then check the matters below Maintenance and CleaningIndicator lights red Projector is shut down and the WarningResetting the Filter Counter Maintenance and Cleaning Cleaning the FiltersCleaning the Projection Lens Maintenance and Cleaning Attaching the Lens CapCleaning the Projector Cabinet Maintenance and Cleaning Lamp Replacement Service Parts No 343 Maintenance and CleaningAppendix TroubleshootingAppendix Image is distorted or runs off Remote Control does not workIndicator blinks or lights Wireless Mouse function does not workAppendix Computer Input Appendix Menu TreeVideo Input Indicators Appendix Indicators and Projector ConditionON-SCREEN Resolution Appendix Compatible Computer SpecificationsSpecifications are subject to change without notice Mechanical Information Panel ResolutionSignal Compatibility PowerOptional Parts Appendix PJ Link Notice USB Connector Series B Appendix Configurations of TerminalsUSB Thumb Drive Case Appendix PIN Code Number MemoPIN Code Lock No Logo PIN Code Lock NoUnit mminch Appendix DimensionsKG5AE