Sanyo PLC-XU355A, PLC-XU305A owner manual Input Menu

Computer Input

Input Source Selection (RGB(PC digital), RGB(AV HDCP))

Direct Operation

Choose Computer  by pressing the INPUT button on the top control or press the COMPUTER button on the remote control.

Before using these buttons, correct input source should be selected through Menu operation as described below.

Remote Control Top Control

COMPUTER button

Input Menu

Menu Operation

1	Press the MENU button to display the On-Screen
	Menu. Use the Point ▲▼ buttons to select Input and

then press the Point ► or SELECT button.

Use the Point ▲▼ buttons to select Computer  and then press the Point ► or SELECT button.

INPUT button

Computer 1

RGB

RGB(PC digital)

Wired 1

3	Use the Point ▲▼ buttons to select RGB(PC digital)
	or RGB(AV HDCP) and then press the SELECT

button.

Note:

•HDCP (High-bandwidth Digital Content Protection) is a system for protecting digital entertainment content delivered by DVI (Digital Visual Interface) from being copied. The specification of HDCP is decided and controlled by Digital Content Protection, LLC. Should the specification be changed, this projector may not display the digital content protected by HDCP.

•Network is for the Network function. See owner’s manual “Network Set-up and Operation” .

•When the Input Search function is set to On1 or On, the input signal will be searched automatically (p.47).

Computer



RGB RGB(PC digital)

Wired 1

30