Sanyo PLC-XU355A, PLC-XU305A owner manual Basic Operation Menu Bar, Rgb

Basic Operation

Menu Bar

For detailed functions of each menu, see “Menu Tree” on pages 70-71.

Main Menu Sub-Menu





















Input

RGB

RGB(PC digital)

Wired 1

Used to select an input source from Computer 1, Computer 2 ,Video, S-videoor Network (pp.29-30,39-40).

PC adjust

Select Fine sync, Total dots, Horizontal, Vertical, Clamp, Display area H and Display area V to adjust the parameters to match with the PC input signal format (p.33).

Image select

For computer source, used to select an image mode among Dynamic, Standard, Real, Blackboard(Green), Colorboard and image 1 - 4 (p.35).

For Video source, used to select an image mode among Dynamic, Standard, Cinema, Blackboard(Green) , Colorboard and Image 1- 4 (p.42).

Image adjust

For computer source, used to adjust computer image [Contrast, Brightness, Color temp., White balance (R/G/B), Sharpness and Gamma] (pp.36-37).

For Video source, used to adjust picture image [Contrast, Brightness, Color, Tint, Color temp., White balance (R/G/ B), Sharpness, Gamma, Noise reduction and Progressive] (pp.43-44).

Screen

For computer source, used to adjust size of the image [ Normal, True, Wide, Full, Custom and Digital zoom +/–] (pp.36-37). For Video source, used to Used to set size of image [Normal, Wide and Custom] (p.45).

Sound

Used to adjust the volume or mute the sound (p.26).

Setting

Used to set the projector’s operating configurations (pp.46-59).

Information

Display the input source information: Input , H-sync freq., V-sync freq., Screen, Language, Lamp status, Lamp counter, Power management, Key lock, PIN code lock and Remote control (p.60).

Network

See owner’s manual “Network Set-up and Operation”.

Guide

The key operation is displayed.

24