Sanyo PLC-XU355A, PLC-XU305A owner manual Input Source Information Display

Page 60

Information

Input Source Information Display

The Information Menu is used for checking the status of the image signal being projected and the operation of the projector.

Direct Operation

 

Press the INFO. button on the remote control to display the

Remote Control

Information Menu.

 

INFO. button

Menu Operation

Press the Point ▲▼ buttons to select Information. The

Information Menu is displayed.

See below for displayed information.

Input

Information Menu

The selected input source is displayed.

H-sync freq.

 

The horizontal frequency of the input signal is displayed in

 

KHz or - - - - KHz when no signal.

 

V-sync freq.

 

The vertical frequency of the input signal is displayed in Hz

 

or - - - - Hz when no signal. Numbers of Hz doubles when

 

during Interlace.

 

Screen

 

The selected screen size is displayed.

 

Language

 

The selected language is displayed.

 

Lamp status

 

The selected lamp mode is displayed.

 

Lamp counter

 

The cumulative lamp operating time is displayed.

 

Power management

 

Off , Ready , Shut down or Timer is displayed.

 

Key lock

 

The selected Key lock icon is displayed.

 

PIN code lock

 

Off , On is displayed.

 

Remote control

 

The selected remote code is displayed.

 

KHz

Hz

H

0

Image 60
Contents Network Supported Memory ViewerFeatures and Design Table of Contents Safety Precaution To the OwnerSafety Instructions Safety Instructions Air Circulation Installing the Projector in Proper PositionMoving the Projector AC Power Cord for the United States and Canada AC Power Cord for the United KingdomCompliance Part Names and Functions FrontBack Bottom⑤ LAN Connection Terminal ⑥ USB Connector Series a ⑫ USB Connector Series BPart Names and Functions ② Point Volume +/- buttons ⑤ Power indicator⑦ Auto SETUP/CANCEL button ⑧ Warning indicatorRemote Control ③ Signal Emission indicatorPart Names and Functions Laser Pointer Function Pointer FunctionSpotlight PointerPart Names and Functions Wireless Mouse Operation Remote Control CodeRemote Control Operating Range Adjustable FeetInstallation Positioning the ProjectorInstallation Connecting to a Computer Cables used for connectionInstallation Connecting to Video Equipment Installation Connecting to Component Video Equipment Installation Connecting the AC Power Cord NoteInput signal guidance window Basic OperationTurning On the Projector Selected Input Source and Lamp ControlInstallation PIN Code Input Dialog BoxBasic Operation Turning Off the Projector How to Operate the On-Screen Menu Remote ControlBasic Operation Top ControlBasic Operation Menu Bar RGBZoom and Focus Adjustment Auto Setup FunctionKeystone Correction Basic Operation Sound Adjustment VolumeVolume Dialog Box MuteBasic Operation Remote Control Operation Timer button No SHOw buttonImage button Screen buttonComputer Input Input Source Selection RGB Computer 1/Computer AnalogInput Menu Input Menu Computer Input Computer System Selection PC System MenuComputer Input Auto PC Adjustment PC adjust MenuTo store adjustment parameters Auto PC adjComputer Input Manual PC Adjustment Reset Mode freeComputer Input StoreImage Mode Selection Image select MenuComputer Input Image Adjustment Image Adjust MenuScreen Size Adjustment Screen MenuCustom Scale H/VPosition H/V For zooming in and out the images Digital zoom +Video Input Input Source Selection Video, S-videoVideo Component RGB Scart Video Input Video System Selection AV System Menu Video or S-VideoVideo or S-Video Component AV System Menu ComponentVideo Input Image Mode Selection CinemaVideo Input Image Adjustment ColorTint Blackboard or ColorboardOff Disabled Lower reduction Higher reduction Progressive Video InputNoise reduction Store Store MenuVideo Input Screen Size Adjustment Setting SettingSetting Menu Language LanguageAuto setup Auto setupInput search Auto KeystonePower off? p.22 KeystoneBackground UserLogo Logo and Logo PIN code lock settings Logo select Logo select , capture and Logo PIN code changeCapture Logo PIN code lock CaptureLogo PIN code lock Change the Logo PIN code lock setting Enter a Logo PIN codeLogo PIN code change Ceiling RearLarge , Middle or Small , Arrow , Finger or Dot and press Power management Standby mode On startClosed caption Lamp life control Remote control Key lock Security Key lock and PIN code lockKey lock PIN code lockChange the PIN code lock setting Enter a PIN code Change the PIN codeEnter a PIN code PIN code changeFilter counter FanFan control Filter counterFactory default Filter counter to the factory default settingsLogo , PIN code lock , Logo PIN code lock , Lamp counter Information Input Source Information DisplayMaintenance and Cleaning Indicator lights redProjector is shut down and the Warning Note Then check the matters belowMaintenance and Cleaning Cleaning the Filters Resetting the Filter CounterMaintenance and Cleaning Attaching the Lens Cap Cleaning the Projection LensCleaning the Projector Cabinet Maintenance and Cleaning Lamp Replacement Maintenance and Cleaning Service Parts No 343Troubleshooting AppendixAppendix Remote Control does not work Indicator blinks or lightsWireless Mouse function does not work Image is distorted or runs offAppendix Appendix Menu Tree Computer InputVideo Input Appendix Indicators and Projector Condition IndicatorsAppendix Compatible Computer Specifications ON-SCREEN ResolutionSpecifications are subject to change without notice Panel Resolution Signal CompatibilityPower Mechanical InformationOptional Parts Appendix PJ Link Notice Appendix Configurations of Terminals USB Connector Series BAppendix PIN Code Number Memo PIN Code Lock NoLogo PIN Code Lock No USB Thumb Drive CaseAppendix Dimensions Unit mminchKG5AE