Sanyo PLC-XTC50AL owner manual Turning Off the Projector

Page 25

Basic Operation

Turning Off the Projector

1

Press the ON/STAND-BY button on the top control

 

 

 

 

 

 

 

 

 

or the STAND-BY button on the remote control, and

 

 

 

 

 

“Power off?” appears on the screen.

 

 

 

 

2

Press the ON/STAND-BY button or the STAND-BY

 

 

 

 

 

 

 

 

 

 

 

 

 

button on the remote control again to turn off the

 

 

 

 

 

projector. The POWER indicator starts to blink red after

 

 

 

 

 

5 seconds. After the projector is turned off, the cooling

 

 

 

 

 

“Power off?” disappears after 4 seconds.

 

fans operates for 90 seconds. At this period of time you

 

can unplug the AC power cord even if the fans are still

 

 

 

 

 

running. During the POWER indicator is blinking, you

 

 

 

 

 

cannot turn on the projector.

 

 

 

 

3

When the projector has cooled down enough, the

 

 

 

 

 

POWER indicator stops blinking and you can turn

 

 

 

 

on the projector. After it is cooled down completely, unplug the AC power cord.

TO MAINTAIN LIFE OF THE LAMP, ONCE YOU

TURN THE PROJECTOR ON, WAIT AT LEAST FIVE

MINUTES BEFORE TURNING IT OFF.

DO NOT UNPLUG THE AC POWER CORD WHILE

THE COOLING FANS ARE RUNNING OR BEFORE

THE POWER INDICATOR STOPS BLINKING.

OTHERWISE IT WILL RESULT IN SHORTENING

THE LAMP LIFE.

DO NOT OPERATE THE PROJECTOR

CONTINUOUSLY WITHOUT REST. CONTINUOUS

USE MAY RESULT IN SHORTENING THE LAMP

LIFE. TURN OFF THE PROJECTOR AND LET

STAND FOR ABOUT AN HOUR IN EVERY 24

HOURS.

Notes:

When the On start function is set to “On,” the projector will be turned on automatically by connecting the AC power cord to an AC outlet (p.56).

The running speed of cooling fans is changed according to the temperature inside the projector.

Do not put the projector in a case before the projector is cooled enough.

If the WARNINGTEMP. indicator blinks or emits red light, see “Warning Indicators” on page 67.

While the POWER indicator is blinking, the lamp is being cooled down and the projector cannot be turned on. Wait until the POWER indicator stops blinking to turn on the projector again.

•The fan rotation will terminate directly if the AC power cord is unplugged immediately after the projector is turned off.

•The projector can be turned on after the POWER indicator turns red.The waiting time to restart will be shortened when the normal power-off processing for fan cooling is completed, compared with the time the AC power cord is immediately unplugged after the power-off.

25

Image 25
Contents Model PLC-XTC50AL Features and Design Table of Contents To the Owner Safety PrecautionSafety Instructions Top Control Air CirculationPositioning Precautions Installing the Projector in Proper DirectionsTransporting the Projector Moving the ProjectorAC Power Cord for the United Kingdom AC Power Cord for the United States and CanadaCompliance Front Part Names and FunctionsBack Audio 2 Jack Side TerminalAudio 3 Jacks LMONO/R BNC Input Jacks1R/C Jack 0USB Connector Series BTop Control Remote Control 9RESET/ON/ALL-OFF switch 4P-TIMER button5D..ZOOM button 6ZOOM ed buttonsWired Remote Control Remote Control Battery InstallationRemote Control Code Adjustable Feet InstallationRemoving the lens Lens InstallationAttaching the lens to the projector Connecting to a Computer Digital and Analog RGB VGA Cables used for connectionMonitor OUT and Audio OUT Specifications Connecting for Audio SignalProjector side AC outlet side Connecting the AC Power CordBasic Operation What is PIN code?Turning On the Projector Enter a PIN codeTurning Off the Projector Remote Control How to Operate the On-Screen MenuOn-Screen Menu Menu Bar Focus Adjustment Zoom AdjustmentLens Shift Adjustment Operating with Projector ControlDirect Operation Sound AdjustmentMenu Operation Operating with Remote Control Shutter button Timer buttonKeystone button Pointer Function Laser Pointer FunctionSpotlight Presentation Pointer button Wireless Mouse OperationRemote Control button operation Remote Control OperationInput Selection InputInput Menu Input Source SelectionRGB PC analog RGB Scart RGB PC digital Video ComponentVideo or S-video Video System SelectionComponent AV System Menu Video or S-videoComputer System Selection Computer AdjustmentSelecting Computer System Manually PC System MenuPC Adjust Menu Auto PC AdjustmentTo store adjustment parameters Auto PC AdjManual PC Adjustment To store the adjusted data To clear the adjusted dataImage Level Selection Image Level SelectionImage Menu Image Adjustment Image AdjustmentImage Adjust Menu Gamma SharpnessNoise reduction ProgressiveTo reset the adjusted data, select Reset and press Screen Adjustment Screen AdjustmentScreen Menu KeystoneScreen Size Adjustment Computer Signals Digital zoom + For zooming in and out the imagesDigital zoom Screen Size Adjustment Video, Component Signals Setting SettingSetting Menu Language LogoLogo PIN code lock CaptureEnter a Logo PIN code Change the Logo PIN code lock settingChange the Logo PIN code Lamp mode When selecting Lamp1/2 modeTimer setting Lamp life control Lamp controlPointer Power management Standby modeDisplay DisplayOn start Slant settingSlant Key lock Security Key lock and PIN code lock settingsKey lock Change the PIN code lock setting Change the PIN code lock settingPIN code lock Enter a PIN codeChange the PIN code Change the PIN codeTest pattern Factory default Factory defaultFilter Instructions Maintenance and CareReplacing the Filter Cartridge Scroll counter Filter counterLamp Mode Changeover Lamp 1/2 Replace IndicatorsAuto Lamp Selection System Lamp Status DisplayLamp Replacement POA-LMP125 Service Parts No 342 Replacement Lamp Type NoModel No.. of your projector Then check the matters below Cleaning the Projector Cabinet Cleaning the Projection LensProblem TroubleshootingNo power AppendixDuring the operation Setting does not remain after Auto PC adjustment functionTurning off power Power management function doesWired remote control does not Remote Control doesWireless Mouse function does Indicator blinks or lightsInput Menu TreeSystem InformationPC Adjust Screen SettingProjector is operating normally Indicators and Projector ConditionImmediately Projector is detecting abnormal conditionIf the Filter counter reached a time set in the timer ON-SCREEN Resolution Compatible Computer Specifications59.940 Technical Specifications Optional Parts PJ Link Notice Output Configurations of TerminalsTerminal D-sub 9 pin Logo PIN Code Lock No PIN Code Number MemoDimensions KH7AM

PLC-XTC50AL specifications

The Sanyo PLC-XTC50AL is a leading-edge projector that has made a significant impact in the world of multimedia presentations and visual displays. Renowned for its robust performance, this projector is designed for a variety of settings, including business presentations, educational environments, and even larger auditoriums.

One of the defining features of the Sanyo PLC-XTC50AL is its high brightness level. With a brightness rating of 5000 ANSI lumens, it can deliver vibrant images even in well-lit environments, making it ideal for conference rooms where ambient light can be a challenge. This high brightness is complemented by a WXGA resolution of 1280 x 800 pixels, ensuring that images and text are sharp, clear, and easily readable from a distance.

Another significant advantage of the PLC-XTC50AL is its advanced color technology. The projector employs Sanyo’s proprietary Smooth Image technology to enhance color accuracy and richness. This feature, combined with the projector’s 3LCD system, ensures that colors are well-balanced and lifelike, providing audiences with a captivating viewing experience.

In terms of connectivity, the Sanyo PLC-XTC50AL doesn't disappoint. It offers multiple input options, including HDMI, VGA, and component video, making it versatile for connecting a variety of devices such as laptops, DVD players, and even gaming consoles. This flexibility is crucial for users who often switch between different media sources during their presentations.

The projector is also engineered for user convenience and maintenance. It features an easy-access lamp compartment that allows for quick bulb replacements, which helps minimize downtime during crucial presentations. Additionally, the projector has a long lamp life, reaching up to 4000 hours in standard mode, significantly reducing operational costs over time.

Moreover, the PLC-XTC50AL is designed with portability in mind, featuring a compact enclosure and lightweight design that makes it easy to transport between locations. It also incorporates features like digital keystone correction, which helps adjust the image up to a certain angle, preventing distortion and ensuring a perfectly squared image regardless of the projector’s position.

For organizations and individuals looking for a reliable, high-performance projector, the Sanyo PLC-XTC50AL stands out as a compelling choice, blending impressive specifications with user-friendly features tailored to meet the demands of dynamic presentation environments.